1995 Camaro Speaker Question
#1
1995 Camaro Speaker Question
Hey guys... first off I'm new to the site, but I appreciate your help ahead of time. Usually car audio is not my forte, but I am going to start rebuilding my '95 camaro Z28 soon and would like to learn a few things along the way.
So a little background first... my camaro's factory system was the Bose system (2 door speakers, 2 in the back, and a sub), but about 4 years ago, I had Circuit City put in a Pioneer HU. They did a horrible job and went out of business the following week so I was unable to bring the unit back. Anyway, although the HU doesn't work properly (produces sound, face plate malfunctions), I am looking to temporarily upgrade my 6.5" door speakers as the one on the driver's side is destroyed. When someone did work on the door previously, they stuck a screwdriver through the speaker while removing the panel and, low and behold, the speaker no longer produces any sound.
So to the question... I know Bose systems have special "amplifiers" for each factory speaker, requiring additional work when installing an aftermarket HU, but since I already have an aftermarket Pioneer HU installed, can I just find some decent speakers to essentially plug-n-play? Or would there be a bunch of additional work that would need to be done?
I hope this question makes sense. Thanks again for the help.
So a little background first... my camaro's factory system was the Bose system (2 door speakers, 2 in the back, and a sub), but about 4 years ago, I had Circuit City put in a Pioneer HU. They did a horrible job and went out of business the following week so I was unable to bring the unit back. Anyway, although the HU doesn't work properly (produces sound, face plate malfunctions), I am looking to temporarily upgrade my 6.5" door speakers as the one on the driver's side is destroyed. When someone did work on the door previously, they stuck a screwdriver through the speaker while removing the panel and, low and behold, the speaker no longer produces any sound.
So to the question... I know Bose systems have special "amplifiers" for each factory speaker, requiring additional work when installing an aftermarket HU, but since I already have an aftermarket Pioneer HU installed, can I just find some decent speakers to essentially plug-n-play? Or would there be a bunch of additional work that would need to be done?
I hope this question makes sense. Thanks again for the help.
Thread
Thread Starter
Forum
Replies
Last Post