Gamesy

I need to find out what adhesive to use to:
some type of thermal? adhesive for making the voice coil
reconnect voice coil to the cone ( epoxy?)
connect the cone and spider to the frame ( some type of rubberised)

And where in GTA i could get it.

Killer_klown187

iTrader: (20)

Ca Glue is used here, also speaker repair cement can be used.
http://www.sayal.com/ActionIndexP.asp?ID=196014

check the speaker repair cement

or
http://www.ajhobby.com/product.asp?pid=1946

Father Yuli

iTrader: (17)

what is your question?

are you asking WHERE to get glue or WHICH glue is required for the job?

Gamesy

Both lol

MTA

iTrader: (1)

go to a hobby store and ask for CA gkue and some kicker( thats what they call it) get the thick stuff not the thin( its too runny and had to work with) for the surround go to canadian tire or home depot and buy "Automotive GOOP" the black stuff...it works great I even do a really tin coat of GOOP over the three point just to give a little added strength incase the CA cracks...but only do this after the ca is fully cured.and dont use too much or you will add too much weight to the cone and change the resonant frequency of the sub,... if you care

Gamesy

Is the CA Glue for reattaching the the cone and the spider right?
what about for the voice coil?

MTA

iTrader: (1)

the ca is for the 3 point... that is where the coil attaches to the spiders and cone

Gamesy

i found more information on it, apparently they use the very thin CA for the voice coil and the thick stuff for attaching the cone.