Mini SPL

First we had to test the power this thing had!

http://members.shaw.ca/xiph0id2/drive.jpg

http://members.shaw.ca/xiph0id2/drive2.jpg

http://members.shaw.ca/xiph0id2/drive3.jpg

http://members.shaw.ca/xiph0id2/drive4.jpg

http://members.shaw.ca/xiph0id2/drive5.jpg

X

And some more....

http://members.shaw.ca/xiph0id2/drive6.jpg

http://members.shaw.ca/xiph0id2/drive7.jpg

Boy it's gunna flex a bunch when we add weight!

Better strengthen up this thing soon.

http://members.shaw.ca/xiph0id2/axle.jpg

http://members.shaw.ca/xiph0id2/axle2.jpg

X

Ok so what fits under the hood?

This one does.

http://members.shaw.ca/xiph0id2/exide.jpg

Wire up with some BLING BLING battery posts he had kicking around.

http://members.shaw.ca/xiph0id2/exide2.jpg

How about a 13.2 craftsman battery that rests at 14.0 volts? Make the car go the fastest that we've tested so far.

http://members.shaw.ca/xiph0id2/battery.jpg

X

[ August 01, 2004, 07:18 AM: Message edited by: Xiph0id ]

Time to get to work.

http://members.shaw.ca/xiph0id2/work.jpg

http://members.shaw.ca/xiph0id2/work2.jpg

http://members.shaw.ca/xiph0id2/work3.jpg

I need some plexi...

http://members.shaw.ca/xiph0id2/work4.jpg

X

[ August 01, 2004, 07:21 AM: Message edited by: Xiph0id ]

Whats going on in here?

http://members.shaw.ca/xiph0id2/diegrind2.jpg

Oh I see. More room for a bigger battery!

http://members.shaw.ca/xiph0id2/diegrind.jpg

Battery fits now!

http://members.shaw.ca/xiph0id2/battery2.jpg

Alright Almost ready for a box!

http://members.shaw.ca/xiph0id2/stripped.jpg

X

[ August 01, 2004, 07:24 AM: Message edited by: Xiph0id ]

Some more testing!

http://members.shaw.ca/xiph0id2/test.jpg

Best of show and loudest car? Could be.

Thats may be what happens when a world calibre SQ and SPL Guy teams up!

http://members.shaw.ca/xiph0id2/plate.jpg

http://members.shaw.ca/xiph0id2/plate2.jpg

Thats it for now folks.

X

Stop using Shaw to host your pics.

Why? Thats what it's there for???

X

u know that older ford escort that is sitting in your drive way is actually couple db's louder for street than the one u are using right now.

awesome job with the pics. can't wait to see more.

are you allowed to modify the bottom of the unit? ie. cut out the floor and drop it to attain more room for install.

change the out the axle for steel and cut a very small hole on the inside edge of those tires and fill them with a sand/water mix and then silicone it back up. That should solve your worries about flexing and or breakage.

Brown bread the whole exterior for the bling factor and don't forget the led windshield squirters for extra hp.