alarm removal and re-instillation python 990 95 integra
 

sorry guys its a lot. just trying to be as detailed as possible

hey guys. i had a couple questions. first off im more of a diy kinda. i like being hands on and dont mind diving in and tackling any project. sometimes i know what im doing sometimes i dont and just learn and research along the way.

with that being said i bought this car and have been cleaning things up cause the original owner seemed like he just took a shortcut with everything lol. so ive been tackling maintenance and lil project here and there. I want to remove the alarm thats currently installed and install my python 990 system.

from the looks of it this is whats going on

violet(ignition) is going to 85 on the relay and to blk/yellow (ignition)
pin 30 and 87a seem to split the blk/wht(starter) wire in half
pin 86 is the Blue(starter defeat)
pin 87 was not used

thats a starter kill relay im told. and it doesnt allow the car to be started when armed?

here are some pics
https://www.caraudioforumz.com/attac...ine=1381191538
https://www.caraudioforumz.com/attac...ine=1381191538
https://www.caraudioforumz.com/attac...ine=1381191538
https://www.caraudioforumz.com/attac...ine=1381191538

id like to keep that function cause it sounds like a good idea. i bought a new stock ignition harness so i can start from scratch and install it cleaner. i was wondering how do i incorporate my python 990 with this relay. ive uploaded the pdf for my alarms wiring diagram.

alarm relay_____________________________________car harness

red/wht- 12v input........................................... white- constant
red- 12v input............................................. .... white- constant
red- 12v input............................................. .... white- constant
pink- ign1.............................................. .. blk/yel- ign1
pink/wht-ign2...........................................wht/blk-ign2
orange- acc............................................... ....yellow- acc
green- starter(key side)............................................ blk/wht- starter
purple- starter(starter side)....................................... blk/wht- key side

pg-14 primary harness
h1 RED/WHITE (-) 200 mA CHANNEL 2 VALIDITY OUTPUT- not used
h2 RED (+) CONSTANT POWER INPUT.................WHITE(ignition harness)
h3 BROWN (+) SIREN OUTPUT.................. self explanatory
h5 BLACK (-) CHASSIS GROUND INPUT....... self explanatory
h6 VIOLET (+) DOOR TRIGGER INPUT, ZONE 3..........??????
h7 BLUE (-) MULTIPLEXED INPUT, ZONE 4...............??????
h8 GREEN (-) DOOR TRIGGER INPUT, ZONE 3............??????
h9 BLACK/WHITE (-) 200 mA DOMELIGHT SUPERVISION OUTPUT... door switch
h10 WHITE/BLUE (-) REMOTE START ACTIVATION INPUT.......???????
h11 WHITE (+)/(-) SELECTABLE LIGHT FLASH OUTPUT.... parking lights
h12 ORANGE (-) 500 mA ARMED OUTPUT...........??????????

pg-16 remote start harness
neutral saftey............................................ ground at parking brake(toggle)
brake shut down.......................................green/white (drivers kick panel)
tach input............................................. . back of gauge cluster

factory 95 integra wiring diagram
1995 Acura Integra Alarm, Remote Starter, Keyless Entry Wiring Information

thank you again for any help possible.