Car Audio Forumz - The #1 Car Audio Forum

Car Audio Forumz - The #1 Car Audio Forum (https://www.caraudioforumz.com/)

- Car Alarm and Mobile Security (https://www.caraudioforumz.com/car-alarm-mobile-security-85/)

- - compustar cm 3000 (https://www.caraudioforumz.com/car-alarm-mobile-security-85/compustar-cm-3000-a-36949/)

I don't know if Supacon had the same problem that I had or what, but my car battery died and after I got it working my compustar alarm system got all screwed up, when I try to start my car it takes 5 minutes before it starts, and before when the car got started, it shuts off automatically 15 mins. later and on the display of my compustar system it used to show a count down of 15 mins., now it shows a count down of 30 mins. and the car automatically shuts off after 30 mins.

Also, if I press on the breaks then my doors will lock!

It started acting very weird .. can someone pls. tell me how to fix this? I brought it to an audio place and they didn't know how to fix it.

Thanks for all your help!!

djkjpro, that sounds a lot like the problems I had. I was able to resolve it by doing the resets as I had previously mentioned. It took me a while to figure out exactly how to do it, but now I can't really remember...

If you go to CompuStar's website you can dig up the installer manuals which can be helpful. But you have to hit the right combination of buttons as indicated there... read this thread and those manuals, and play with the remote. If you can get into those "menus" by pressing the right combination of buttons to reset, that should fix your problems.

Hi,

I can't find the info, if anyone knows how to fix this issue pls let me know.

Thanks!

Here's a link to the install manual, for starters:
http://www.compustar.com/dsupport/manuals/install_manuals/CM3000_SimpleManual_V1.0_nonprint.pdf

I'm having the same problem. I talked to Ray at Compustar and he told me the procedure described above, but no matter what I do, I can't seem to get any options to change.

Quote:

Originally Posted by djkjpro (Post 326270)

Hey guys I had the same problem. Went back to future shop & asked a few questions. The installer told me that the problem is that it went back to the factory setting in deisle mode. He then got his gadget out (OP500) by firstech LLC. Then reprogrammed the brain. Now all works great. So I googled the gadget & bought one. So if you need any other info feel free to ask.

Ciao