Car Audio Forumz - The #1 Car Audio Forum

Car Audio Forumz - The #1 Car Audio Forum (https://www.caraudioforumz.com/)
-   Car Alarm and Mobile Security (https://www.caraudioforumz.com/car-alarm-mobile-security-85/)
-   -   remotestart help needed!!! 99 3.5rl w/871xp+TBXKEY (https://www.caraudioforumz.com/car-alarm-mobile-security-85/remotestart-help-needed-99-3-5rl-w-871xp-tbxkey-265001/)

pmendoza502 06-24-2014 02:41 PM

remotestart help needed!!! 99 3.5rl w/871xp+TBXKEY
 
6 Attachment(s)
I have an problem with the remotestart inconsistently starting the car.

I have made sure the key in the TBXKEY starts the car, made sure the jumpers are in their right places, and tried to make sure the wires are all in their right places but im not an alarm expert and despite having installed a number of stereos, amps, head units and subs, along with air suspension management systems, alarms still feel "over my head"

below are pics of how the TBXKEY is installed- I apologize in advance if these pics are not clear...

https://www.caraudioforumz.com/attac...ine=1403638860

https://www.caraudioforumz.com/attac...ine=1403638860

https://www.caraudioforumz.com/attac...ine=1403638860

It will oddly work once in a while, and i have a feeling that long black wire is the culprit. earlier today i touched my key to said black wire and tried to remotestart the car and wala! it worked! but my following attempts from outside the car fail in starting the car...

pmendoza502 06-25-2014 12:56 PM

What else can cause the remote start to function so infrequently?

pmendoza502 06-25-2014 02:46 PM

So In an update, I was playing around with that long black wire and ran it to its length away from the TBXKEY and the key cylinder so as not to pick up any interference and tried to position the loop closer to the front of the key cylinder and WALA! IT WORKED!!!

Now Im debating weather to remove that plastic surround on the loop and just use a few pieces of electrical tape to keep it together while having some wires exposed to better transmit the signal to the key cylinder. Also i am now debating whether or not to replace the bypass module with a better one that doesnt require the loop for consistency's sake, any recommendations?

safdar 10-10-2014 01:33 PM

did you get the solution for this issue or not
?


All times are GMT -5. The time now is 01:26 PM.


© 2024 MH Sub I, LLC dba Internet Brands