new MOSCONI AS 100.4S - in Amps - $$625
14 Attachment(s)
Condition: NEW
Category: Amps I have a MOSCONI AS 100.4S for sale. Power Type: CLASS AB Asking Price is $$625 Seller Information: Tara Brown Phone: This is a Mosconi AS 100.4S 4 channel class AB amp. Made in Italy. IT is for the true audiophile. New, has never been played and still in all original packaging. These retail for over $1000. Developed from unique design and pure audiophile sound, has achieved the most prestigious award from EISA 2010-2011 award for best car amplifier with this AS 100.4. This amp is for those that want power, control and great audiophile quality from such a small compact device. Provided with slots for optional G_HOC ( optimizing cards for preconfigured settings) G_FSA ( to regulate the front stage) and G_HP/LP ( out frequencies from 25 hz). SPECS LISTED BELOW: TARGET POWERs: EFFECTIVE POWERs: THD@ 4Ohm/STmode: THD@ 2Ohm/STmode: DIM@ 4Ohm/STmode: DIM@ 2Ohm/STmode: 100 Watt per channel @ 4 Ohm 155 Watt per channel @ 2 Ohm 310 Watt BTL mode @ 4 Ohm 480 Watt BTL mode @ 2 Ohm (*) 110 Watt (80 Watt @12V6) x 4 162 Watt (118 Watt @12V6) x 4 324 Watt (236 Watt @12V6) x 2 46.6 A (η = 65.5 %) @ 4 Ohm / ST mode / 1% THD / 1KHz 79.8 A (η = 56.4 %) @ 2 Ohm / ST mode / 1% THD / 1KHz 79.8 A (η = 56.4 %) @ 4 Ohm / BTL mode / 1% THD / 1KHz < 0.02 % (1KHz / 90% Power rating ref) < 0.03 % (1KHz / 90% Power rating ref) < ---- % (Power rating ref) < ---- % (Power rating ref) Unregulated 50 KHz (± 6 %) 10 V ÷ 16 V 11 V ÷ 14.4 V 9 V / 7.5 V 3 secs ±34 V / ±7.7 V / ±13.5 V ±15 mV 1.8 mA (typical) 0.61 A / 0.65 A (no idle current regutation) 0.04 A (each channel) 0.77 A / 0.81 A (with idle current setted) 1A 125 Ohm 70 Ohm < 5 Hz ÷ 200 KHz 0.2 V ÷ 5 V 11 KOhm 220 pF 15R 90 dB 110 dB (“A” weighted) 6.42 uV 0.64 uV (“A” weighted) 79 dB / 72 dB / 54 dB HIGH Pass & LOW Pass (BAND Pass allowed) (20 ÷ 175Hz) & (50 ÷ 300Hz) 12 dB/oct - 0.7 (Stereo & Mono) 88 °C (±5°C) 55 °C (±5°C) 89 / 108 [Front] - 133 / 175 [Rear] 89 / 109 [Front] - 131 / 170 [Rear] 82 / 99 [Front] - 115 / 151 [Rear] 45 mOhm / 37 mOhm [Front] - 30 mOhm / 23 mOhm [Rear] 1 Ohm / 2 Ohm (Stereo / Bridged) 80 A (Internal) DC-DC converter typology: Conversion frequency: Absolute maximum operation supply voltage range: Recommended operation supply voltage range: Power-on/Power-off Voltage Threshold: Mute delay time: Secondary voltages (Amp. / Driver / Pre.): Max output offset voltage (each channel): Standby current: Quiescent consumption @ 12V6 / 14V4: Idle current regulation (no signal): Quiescent consumption @ 12V6 / 14V4: Thermal protection consumption: Battery ground vs secondary ground decoupling: Body ground vs battery ground decoupling: Bandwidth (-3dB ÷ 1 Watt): Input sensitivity (Power rating ref): Input impedance @ 1 KHz (STEREO input): Input capacitance @ 1 KHz (STEREO input): Input ground decoupling: S/N ratio (AP filter 10 Hz - 500 KHz ) – Power rating ref: S/N ratio (AP filter 10 Hz - 22 KHz ) – Power rating ref: Eq. Input noise (AP filter 10 Hz - 500 KHz ): Eq. Input noise (AP filter 10 Hz - 22 KHz ): Channel separation@ 100Hz / 1KHz / 10KHz – 10 Watt ref: Xover functions: Filter slope - Filter "Q": Thermal cutoff Threshold: ProSPEED® Fan Controller Threshold: Damping factor @ 100 Hz - 10 Watt ref (Right / Left): Damping factor @ 1 KHz - 10 Watt ref (Right / Left): Damping factor @ 10 KHz - 10 Watt ref (Right / Left): Output impedance @ 1 KHz - 10 Watt ref: Load drive limitations (*): Suggested fuse: (*) VERY IMPORTANT NOTE - READ CAREFULLY 4 Ohm ST or 8 Ohm BTL – CONTINUOUS SINEWAVE SIGNAL – pure resistive load or speaker load 2 Ohm ST or 4 Ohm BTL – MUSICAL SIGNAL – pure resistive load or speaker load 1 Ohm ST or 2 Ohm BTL – MUSICAL SIGNAL – speaker load only |
All times are GMT -5. The time now is 11:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands