choosing proper battery setup for warhorse
03-05-2011, 05:17 PM
#1
0 Watt CAFz'r
Thread Starter
Join Date: Oct 2007
Posts: 5
choosing proper battery setup for warhorse
Hey guys, just dove in and ordered up a kicker warhorse and two solo 18's, I already have a powermaster 300amp alt dedicated to amp duty but I'm stuck tring to figure out which batteries to use I was thinking of using 5 1000ca deep cycles but let me know if you can give some input. Thanks
03-05-2011, 06:24 PM
#3
Goalie Man
Join Date: May 2003
Posts: 1,412
i would run that amp at one ohm mono off of that alt. with 4 d3100 powermaster batteries... run 00 gauge wire and a 300 amp self reseting circuit breaker.. wire is avalible at princess auto its just welding cable.. that way you know you are not getting cca wire. and its about 4 bucks a foot.. once the amp is in go see shaun murley at visions in red deer and he can give you all the tech support you need...
03-06-2011, 02:34 PM
#5
0 Watt CAFz'r
Thread Starter
Join Date: Oct 2007
Posts: 5
Hey thanks guys for the input, haven't had any first hand experience with the powermaster batts but they sound like they might do the trick, I've never ran a 10,000 rms amp before so I really want to protect my investment.
03-06-2011, 03:37 PM
#6
2000 Watt CAFz'r
Join Date: May 2007
Posts: 2,141
the powermaster batts are top of the line , theyll give you the juice you need the 3100s are 5000 ccas each which is unreal for a single batt 4 of those bad boys would deffinitly power that amp give dale a call hes the powermaster dealer for canada just a great guy tons of experiance , he uses a pair of the d3100s in his st c crx , which has won numerous north american titles
Thread
Thread Starter
Forum
Replies
Last Post
arash89
Car Alarm and Mobile Security
3
12-17-2009 03:01 AM
