JBL BPX 500.1 problem...
#1
JBL BPX 500.1 problem...
well, the amp got a bit wet while i was drivin home. started turning off and on and making the subs pop.
what happens:
power to the amp
5 seconds later, the protect light comes on, and the amp shuts off
half a second later, the amp gets power again
5 seconds later, the protect light comes on, and the amp shuts off
(this happens 5 times)
then the amp turns on again
then the I-E OPT light comes on, the amp turns off and the protect light comes on again.
so yea. the thing is screwed right now. im pretty good at fixing stuff, but i dont know where to start with this... anyone else have similar problems with their BPX 500.1?
what happens:
power to the amp
5 seconds later, the protect light comes on, and the amp shuts off
half a second later, the amp gets power again
5 seconds later, the protect light comes on, and the amp shuts off
(this happens 5 times)
then the amp turns on again
then the I-E OPT light comes on, the amp turns off and the protect light comes on again.
so yea. the thing is screwed right now. im pretty good at fixing stuff, but i dont know where to start with this... anyone else have similar problems with their BPX 500.1?
#3
my truck's rear cab seal lets a bit of water in when it rains. this soaked my carpet. i had the amps on the carpet, and when i got home, i took the amp out, and it was a little bit moist underneath. i took it apart, and nothing was wet or looked damaged or anything, so i put it back together, and it still does the same thing.
#6
its actually the back of the cab where the metal is pinch welded together. the seam is weak and leaking. havent driven the truck in a while though, next time i have the box off, im going to seam seal the crap out of it.