Please please help with this install on alarm
 

I have a 2005 chevy equinox, and wanting to install a new alarm system since it doesn't have one, my alarm of choice is compustar cm3000vf I have everything installed and have programmed my remotes to work, they only flaw I have is this simple diagram which I don't know what to install for the remote locks since my system is a negative output take a look at the pictures and please help me.
for some reason I can't get the one picture to upload my chevy is as this power door lock - lt blue wire
power door unlock- dark blue
so which one do use to wire this up to the alarm box.

Your power door locks in your vehicle need a postive pulse to operate, so your going to need to use 2 relays and wire the door locks for positive door locks. Terminals 86 and 87 on both relays go to 12 volts, 85 on one relay is your -lock input (from compustar) the other relay will be the - unlock input (from compustar) . Terminal 30 is your output to the positive door lock wire.and the other relay will be the Unlock output. So on the relay that your - lock input is (terminal 85) terminal 30 will be the + output to the door lock wires in the vehicle.The other relay will be your Unlock relay. Your vehicle lock wire is Lt.Blue and the Unlock wire is Dk Blue.