Kenwood KDC-BT365U detach button
09-29-2018, 02:17 PM
#1
0 Watt CAFz'r
Thread Starter
Join Date: Sep 2018
Posts: 4
Kenwood KDC-BT365U detach button
Hello,
I have a Kenwood KDC-BT365U where I haven't been able to detach the faceplate.
When I press the detach button nothing happens.
Perhaps somethings stuck but I don't want to damage the radio trying to force a detach of the faceplate.
I have a Kenwood KDC-BT365U where I haven't been able to detach the faceplate.
When I press the detach button nothing happens.
Perhaps somethings stuck but I don't want to damage the radio trying to force a detach of the faceplate.
09-29-2018, 03:09 PM
#2
0 Watt CAFz'r
Thread Starter
Join Date: Sep 2018
Posts: 4
After removing the radio and it's bezel I started to remove the fascia and noticed a small screw on narrow side near the detach button. Removing this screw the detached buttons starts to function.
The screw when screwed down prevents the detach mechanism from functioning.
I picked up this Kenwood used as a store return. Perhaps the screw is there to prevent the faceplate from becoming detached during shipping and handling ? or for some other reason?
The screw when screwed down prevents the detach mechanism from functioning.
I picked up this Kenwood used as a store return. Perhaps the screw is there to prevent the faceplate from becoming detached during shipping and handling ? or for some other reason?
Thread
Thread Starter
Forum
Replies
Last Post
danielsean
Car Audio Technical Discussions
0
11-05-2015 10:16 PM
