Enclosure Design & Construction Help Post and discuss your car audio box construction, design, fiberglass and other fabrication questions here.

15" L7 box help

Old 03-08-2007, 06:20 PM
  #1  
0 Watt CAFz'r
Thread Starter
 
cwilkes13's Avatar
 
Join Date: Feb 2007
Posts: 14
15" L7 box help

I just bought a 15" L7 dual 4 ohm and I want to make a box. I found a really good site, but I have trouble figuring all this stuff out. I listen to rap mostly. Do I want 35 Hertz? Lower the Hertz the deeper the bass right? I have an Ultimate T3 500D powering the unit at 900 rms/1800 max @ 2 ohm. Any dimensions for a box would be helpful. Ported or sealed? Thanks so much guys.


http://subwoofertools.com/forum/ported-box.asp
cwilkes13 is offline  
Old 03-08-2007, 06:47 PM
  #2  
500 Watt CAFz'r
iTrader: (4)
 
FusionMadsen's Avatar
 
Join Date: Jun 2006
Posts: 883
Ported at about 4 cu/ft would be nice.
FusionMadsen is offline  
Old 03-09-2007, 11:09 AM
  #3  
50 Watt CAFz'r
iTrader: (5)
 
cav2nv420's Avatar
 
Join Date: Jul 2006
Posts: 408
5cb.ft. 50 square" of port, 15"long, tuned to 33hz
cav2nv420 is offline  
Old 03-09-2007, 04:20 PM
  #4  
0 Watt CAFz'r
Thread Starter
 
cwilkes13's Avatar
 
Join Date: Feb 2007
Posts: 14
cav2nv420, do you have one (or more) on these? It shows one in your picture. How does it sound and what are you powering it with?
cwilkes13 is offline  
Old 03-09-2007, 07:07 PM
  #5  
--SPECIAL ED--
iTrader: (-1)
 
sunfired's Avatar
 
Join Date: Feb 2007
Posts: 452
i would do an L7 around 28 hz,i had a 12 ported to 28 and it was awesome,kickers are low hitting subs,They seem to love the low end lol
sunfired is offline  
Old 03-09-2007, 10:04 PM
  #6  
50 Watt CAFz'r
iTrader: (5)
 
cav2nv420's Avatar
 
Join Date: Jul 2006
Posts: 408
Originally Posted by cwilkes13
cav2nv420, do you have one (or more) on these? It shows one in your picture. How does it sound and what are you powering it with?

right now im runmimg one in a waaay too small of a box, its 2.5 cb.ft. and needs to be 5cb.ft. but its powered by a orion 2500d amp my future plans are to run two in a wall
cav2nv420 is offline  
Old 03-10-2007, 09:30 AM
  #7  
Guest
 
Lorrd Fapa's Avatar
 
Join Date: Dec 2006
Posts: 89
Talking

I have a friend thats running 2 15l5 at the recommended box for l7 and it hammers. 4.5 cuft and about .45 of slot port on each end in a 93 extended cab pickup. Music wise sounds awesome and still goes incredibly loud.
Lorrd Fapa is offline  
Old 03-11-2007, 09:15 PM
  #8  
50 Watt CAFz'r
iTrader: (5)
 
cav2nv420's Avatar
 
Join Date: Jul 2006
Posts: 408
Originally Posted by Lorrd Fapa
I have a friend thats running 2 15l5 at the recommended box for l7 and it hammers. 4.5 cuft and about .45 of slot port on each end in a 93 extended cab pickup. Music wise sounds awesome and still goes incredibly loud.

is that 4.5 per sub or both? thats too small but will still sound good but if you want spl go 5 cb.ft. per driver, if you want more of music go smaller tuned higher, but if you are using L&'s they are not a great music style sub, they just like to be pounded on hard and play nice and low
cav2nv420 is offline  
Old 03-11-2007, 09:28 PM
  #9  
1000 Watt CAFz'r
iTrader: (17)
 
worldind's Avatar
 
Join Date: Apr 2006
Posts: 1,029
Originally Posted by cav2nv420
is that 4.5 per sub or both? thats too small but will still sound good but if you want spl go 5 cb.ft. per driver, if you want more of music go smaller tuned higher, but if you are using L&'s they are not a great music style sub, they just like to be pounded on hard and play nice and low
I think I'd say the opposite - for SPL I'd go smaller tuned higher, and for music bigger and lower
worldind is offline  
Old 03-13-2007, 07:32 PM
  #10  
0 Watt CAFz'r
Thread Starter
 
cwilkes13's Avatar
 
Join Date: Feb 2007
Posts: 14
I am hearing conflicting answers. Does lower hertz = deeper bass and lower SQ or vice versa?
cwilkes13 is offline  

Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:38 AM.