AW1206T ported box design
#1
AW1206T ported box design
just wondering if someone can help me design a ported box for these subs? id like a slot ported box for the 2 12s and the last box i had in my car was 30.5Wx21Dx15H and i could probably go as big as 36Wx27Dx15H but id like to keep the depth down if i can as it might be tight to fit in a 4dr lol
heres specs for the AW1206T
http://www.audiobahn.com/Audiobahn06/images/tech/2005/boxParams/AW06T_box_specs.pdf
Thanks To anyone that helps
heres specs for the AW1206T
http://www.audiobahn.com/Audiobahn06/images/tech/2005/boxParams/AW06T_box_specs.pdf
Thanks To anyone that helps
Last edited by _HeC_; 02-16-2007 at 12:50 PM.
#3
so im trying to get this all done on 1 sheet of 3/4MDF but i ran into a issue, since i need a load of 13.5" pieces i made a entire row of them and then the next peice size i need is 35.5" but 35.5+13.5=49 which is the exact width of a 4x8 sheet of MDF so i cant count the width of the saw blade, so the 35.5" pieces would be like 1/8 short and the port will be a 1/8" short aswell, will this be a big issue?
heres a diagram i came up with for teh cuts, if anyone sees a better way of doing the cuts let me know...the shaded in balck parts are scrape or can be used for bracing
heres a diagram i came up with for teh cuts, if anyone sees a better way of doing the cuts let me know...the shaded in balck parts are scrape or can be used for bracing
#4
well i couldnt wait to build the box lol i threw the subs in a slot ported box that i have for my kicker comp VRs and it hits pretty hard in there...im hoping to have the box built this week and when i throw that in i will hook up the line driver aswell, perhaps ill take some pics later today
Thread
Thread Starter
Forum
Replies
Last Post
zverka1
Car Audio Wanted (WTB)
0
07-31-2006 08:32 PM