Best material?
 

what do u guys use to make ur box's?
wood? plexy glass?? and what sizes? do u stuff them?
thanks

3/4-1" MDF, nice strong glue and brad nails to keep it together while the glue sets.

Best material
i like f/g but mdf with f/g inside also good ,just mdf is ok

mdf due to the price to preforamce ratio, but if i had the $$ baltic birch ply or any marine grade plywood.

as for stuffing. i have never had to use it. but by adding 1.5lbs per cf.will make the sub think its in a box about 20% larger. the larger the box the less effect polfill will have on it

I make wooden forms and cast all the panels in 1" concrete slabs. :smilie_da

It takes a little longer...

do you add lead too

If you'll pardon the pun, you'd better get stiffer springs for the hearse....:cheeky4:

I bet cutting the holes for the drivers is a pain....:hah:

3/4 mdf for the most part

cheap, easy to work with, strong enough.

when in doubt double up

4 pieces of 1/4" mdf laminated together if i had to choose

Nah - I just used my 14" hole punch :smokin: