Building a box for my ranger
#1
Building a box for my ranger
The first box was for my F150 which held two 10's and fit under the rear seat(which I rased 2"). That box was only a mdf rectangle.
Now on to the second box. In the making. I forget but I believe I made it 13" by 17" by 20" (wedge). The box will have an internal volume of .8 cubic feet. A 4" by 8" port. Which is the specs for a pioneer 12" shallow mount. When the box is done I'll post pictures of it in the truck and you'll understand why I went with this sub.
The truck for those intersted: http://img.photobucket.com/albums/v2...7/PB020099.jpg
Now on to the second box. In the making. I forget but I believe I made it 13" by 17" by 20" (wedge). The box will have an internal volume of .8 cubic feet. A 4" by 8" port. Which is the specs for a pioneer 12" shallow mount. When the box is done I'll post pictures of it in the truck and you'll understand why I went with this sub.
The truck for those intersted: http://img.photobucket.com/albums/v2...7/PB020099.jpg
Last edited by gyrotech; 11-07-2006 at 09:58 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Brian Sanders
Canadian General Car Audio Discussion
44
04-13-2010 11:56 PM
Riddle_Rob
Car Audio Wanted (WTB)
0
04-20-2006 10:55 PM