Dual 15's ported.
#1
Dual 15's ported.
Hey guys, I am building a box for 2 15" subs.
My only problem is, I don't know just how to place the port and what not.
I'm building it in the trunk of my car, I've got the room to get the cubic feet needed for the box.
My idea was to have the subs facing up, and the port facing the trunk opening? (Subs on top, port on the back)
I don't know how exactly I need to position the subs, or port.
Any insight? Thanks.
My only problem is, I don't know just how to place the port and what not.
I'm building it in the trunk of my car, I've got the room to get the cubic feet needed for the box.
My idea was to have the subs facing up, and the port facing the trunk opening? (Subs on top, port on the back)
I don't know how exactly I need to position the subs, or port.
Any insight? Thanks.
#5
Any ideas how I could fire them up and do the port towards the back?
Unless you know any other way I can actually do it, because my trunk doesn't have the room to fire them back. /=
EDIT - forgot about this box type. I can do this, as well.
Still need to know how to do the port. /= Going to do the port in between the subs.
Last edited by Dat2001Stang; 02-26-2013 at 09:18 PM.
#8
#9
you have about 5.5 after displacement of subs ,port and bracing
i would go with 2 12's but if you insist on 15's i would get something that likes small boxs and run a lot of power to it to make up for the small box
sundown audio 15zv3 would be a good choice
i would go with 2 12's but if you insist on 15's i would get something that likes small boxs and run a lot of power to it to make up for the small box
sundown audio 15zv3 would be a good choice
#10
I will most likely just do 1 15 due to space. Still have to top mount though.