Need help building box for 2 Earthquake DBX10 10" sub
 

I just finished moving and I was unpacking boxes that we had in storage and I came accross my old Earthquake PH120.2 and 2 dbx10. So I went out and got a used box and installed them in our mini van, but now I would like to build a box to specs but can not find much info on them. I was wondering if anyone knows the cu.ft for the dbx10?

EDIT: I have 48" wide and 16" deep to play with, I would also like the box to be vented. Would like the box to be 48" wide as my amp rack is 48" wide.

Here what I have so far and to work with, mostly listen to rap and hip- hop but I do play some country and pop for my girlfriend.

It will not let me post any pictures.

EDIT: It was Explorer that wouldn't let me upload a pic, installed Safari and it works.

you can find all the info you need for the subs on earthquakesound.com

I have checked the site and did not see the dbx model, they are old models all black cone. They do have dbxi model but they have red wrting on them.

Here my finished box box for my two dbx10. Let me know what you think of it. :)

Looks much neater than the earlier picture.

It looks much nicer. How does it sound?

Thanks I think it looks good for my first time around. Each sub got 1.75 cu.ft and tuned to 33 hertz. For only two 10" and preety good in the extended mini, there is flex in the roof. lol Tomorrow I was planing on making a small video for youtube. I picked up a Ultra UL1500X for $50 today, hooked it up and it started to smoke. Took it in the house and took the top cover off and found rust and corrosion inside.

Videos let me know what you guys think.

https://www.caraudioforumz.com/attac...ine=1320699553

https://www.caraudioforumz.com/attac...ine=1320699553