Enclosure help !!
#1
Enclosure help !!
I am looking into building an enclosure for my 10 inch Alpine Type S. I don't know what's best for use in a trunk with a JBL 300.1 for everyday listening. I've been talking with Dukk and hes looking at is but suggested I post in here for more input. I have a huge range in music with hip hop/top 40 being tops.
Any and all help is much appreciated.
Any and all help is much appreciated.
#3
The only information I can find is for a factory tuned box that this sub was available for purchase with. Its a sealed+bandpass hybrid box that's tunes to 30 Hz. But that's all I can find on it. the model number is Alpine SBS-1041BP. I'd like to have this box or at least the proper sepcs to have one built.
John
John
#4
well since no one else seems to want to post ill be kind and post....im dont know much about this but uhh... sounds like you are wanting a ported box? well ive never made a good one so i dont know what to tell you, but you say u want a daily listner for all types of music, wellll i would just say a simple sealed enclosure built to spec for the sub, it will also use less space leaving more room for other things considering this is a daily driver car n all
#5
Originally Posted by BIG UNIT
The only information I can find is for a factory tuned box that this sub was available for purchase with. Its a sealed+bandpass hybrid box that's tunes to 30 Hz. But that's all I can find on it. the model number is Alpine SBS-1041BP. I'd like to have this box or at least the proper sepcs to have one built.
John
John
you could try dloading winisd,its a free program for designing boxes irrc they have all the specs listed for alpine subs ( except the type x) ill look into it tomorrow for ya.
#8
Here are the specs from Alpine
General
* • Diaphragm Material : Aluminum Coated Poly and Kevlar Reinforced Pulp
* • Displacement Front Mounted : 0.067 cu.ft.
* • Displacement Rear Mounted : 0.086 cu.ft.
* • Frame Design : Deep Draw with Vented Leg/Spider Plateau, Integrated Terminal landing
* • Gasket Design : Injection Moulded Hidden Screw Design with Front/Rear Sealing
* • Magnetic Weight : 50oz.
* • Motor Structure Configuration and Pole Geometry : Extended Dual Flare Pole Vent, Compound Radius Curve( Patent #6, 639, 993)
* • Mounting Depth (top mount) : 153mm (6.1")
* • Mounting Diameter (top mount) : 227mm (9")
* • Optimum Sealed Box Volume : 1.0 cu. ft.
* • Optimum Vented Box Volume : 1.2 cu.ft,
* • Recommended Box Types : Sealed/Vented/Bandpass
* • Recommended Sealed Box Volume : 0.65 - 1.5 cu. ft.
* • Spider Material : Nomex®
* • Surround Design and Material : High Excursion Tapered Half-Roll, Injection Moulded Santoprene®
* • Terminal Type : Heavy Duty 8ga. Push with Housing, Banana Plug Jumper
* • Vented Box Volume Range, Vent Diameter/Length : 1.0-1.75 cu.ft., 3" ID x 9" Long
So for a sealed box thats square you could build it 13.5" x 13.5" x 13.5" outside dimensions and that would be 1 cu. ft. inside volume. and for vented they say 1.2 cu. ft. so 14.5" x 14.5" x 14.5" outside dimensins will give you the desired volume needed and a port 3" ID x 9" long.
I wouldn`t try a bandpass encloser if your not familiar with box building, so I didnt give you any specs for one.
Hope this helps
Garett
Hope this helps
General
* • Diaphragm Material : Aluminum Coated Poly and Kevlar Reinforced Pulp
* • Displacement Front Mounted : 0.067 cu.ft.
* • Displacement Rear Mounted : 0.086 cu.ft.
* • Frame Design : Deep Draw with Vented Leg/Spider Plateau, Integrated Terminal landing
* • Gasket Design : Injection Moulded Hidden Screw Design with Front/Rear Sealing
* • Magnetic Weight : 50oz.
* • Motor Structure Configuration and Pole Geometry : Extended Dual Flare Pole Vent, Compound Radius Curve( Patent #6, 639, 993)
* • Mounting Depth (top mount) : 153mm (6.1")
* • Mounting Diameter (top mount) : 227mm (9")
* • Optimum Sealed Box Volume : 1.0 cu. ft.
* • Optimum Vented Box Volume : 1.2 cu.ft,
* • Recommended Box Types : Sealed/Vented/Bandpass
* • Recommended Sealed Box Volume : 0.65 - 1.5 cu. ft.
* • Spider Material : Nomex®
* • Surround Design and Material : High Excursion Tapered Half-Roll, Injection Moulded Santoprene®
* • Terminal Type : Heavy Duty 8ga. Push with Housing, Banana Plug Jumper
* • Vented Box Volume Range, Vent Diameter/Length : 1.0-1.75 cu.ft., 3" ID x 9" Long
So for a sealed box thats square you could build it 13.5" x 13.5" x 13.5" outside dimensions and that would be 1 cu. ft. inside volume. and for vented they say 1.2 cu. ft. so 14.5" x 14.5" x 14.5" outside dimensins will give you the desired volume needed and a port 3" ID x 9" long.
I wouldn`t try a bandpass encloser if your not familiar with box building, so I didnt give you any specs for one.
Hope this helps
Garett
Hope this helps
Thread
Thread Starter
Forum
Replies
Last Post
wasted911
General Discussion
7
05-04-2017 08:40 PM
unknown123
Car Audio For Sale
2
02-01-2012 10:56 PM
mittal
Enclosure Design & Construction Help
11
02-16-2005 08:17 PM