enclosure for w12gti
enclosure for w12gti
I have the weekend off and was hoping to build a box for the gti that i got like 3 weeks ago. i want to go ported and it will be going into a 02 accord. i havent built or designed a box before so i was wondering if i could get a little help with the design part of it
I'm out of town right now without my vehicle. Guessing at the dimensions though I would say no taller than 17" and probably no wider than 32" depth could be whatever. And its going in the trunk of a 2002 honda accord coupe
jbl recommends a 2.25 ft3 box with a 4" port 13.31" long with 1" fiberfill along all walls and that includes all displacement so I think Im going to try and build it this weekend since i have some free time again these the are the dimensions i was going to use since I wanted the port and woofer both firing the same direction it is pretty deep...20.375"W x 15.25"H x 18"D with 1"MDF says i should get 2.25434 ft3 does that sound like it will work or does anybody have any other suggestions?
with 3/4" would you recommend double baffle on the front? the woofer would be flush with the box also if i had a double baffle and had a larger hole on the outer one. I read for a round port the port opening should be at least that far away from any obstructions inside the box is this true?
thats what i was going to do or see if my local shop haad some aeroports....with a 4x8 sheet i should have enough to build a sealed box too so i was thinking of running it sealed in my car for a bit until i could get some aeroports so that my ported box is bult right and doesn't sound like crap




