it's time for anouther box build
well basically it's a 10" clarion sub XW1000
im just looking around, at what i can do with these 2 sub's(look down for other one)
i wanna go with a ported box. i will give some more info latter on how big it can be.
Outside Dia 10"
Mounting Hole 241mm
Mounting Depth 152mm
Sensitivity 89dB
Max. Peak Music 400W*2
Continuous Power 200W*2
Nominal Impedance 1.9 Ohm (paralleled)
Re DC Imp (± 10%) 3.7 Ohm
Le 1.22 mH@1kHz
V.C. Diameter 2"
V.C. Length 30mm
Air Gap 8 mm
Piston Diameter 215mm
Sd 0.0363 sqM
Vas 25.634 L (paralleled)
Fs 45.479 Hz (paralleled)
Qts 0.4017 (paralleled)
Qes 0.4256 (paralleled)
Mms 89.393 g (paralleled)
Mmd 85.416 g (paralleled)
Rms 3.41 kgs-1 (paralleled)
BI 10.679 TM (paralleled)
Speaker Displacement 39.93 CM3(paralleled)
Xmax 11mm
Magnet Weight 85.5 oz
this is anouther 10" sub from clarion. SRW1085
im looking for anouther ported box.
this sub is last year's modle i think.
and like above im still got to get the max size for the box
Outside Dia 266 mm
Mounting Hole 228 mm
Mounting Depth 145 mm
Sensitivity 79 dB
Max. Peak Music 500 W
Continuous Power 250 W
Nominal Impedance 4+4 ohm
Re DC Imp (± 10%) 3+3 ohm
Le 0.5/2.1 mH
V.C. Diameter 38.55 mm
V.C. Length 41.71 mm
Air Gap 8 mm
Piston Diameter 50 mm
Sd 195 mm
Vas 46.3/45.0 L
Fs 29 Hz
Qts 0.88/0.85
Qes 0.97/0.94
Mms 94.5/100.4 gr
Mmd 100 g
Rms 2.1/2.2 kg/s
BI 5.3/11.1 N/A
Speaker Displacement 2.9 L
Xmax 9.15 mm
Magnet Weight 35.4 OZ
this is hte max it can go, but i'll duble check on that. 12"Widthx36"Lengthx17"hieght
thank's to any one who help's out
[ March 24, 2005, 12:24 PM: Message edited by: lumina guy ]
im just looking around, at what i can do with these 2 sub's(look down for other one)
i wanna go with a ported box. i will give some more info latter on how big it can be.
Outside Dia 10"
Mounting Hole 241mm
Mounting Depth 152mm
Sensitivity 89dB
Max. Peak Music 400W*2
Continuous Power 200W*2
Nominal Impedance 1.9 Ohm (paralleled)
Re DC Imp (± 10%) 3.7 Ohm
Le 1.22 mH@1kHz
V.C. Diameter 2"
V.C. Length 30mm
Air Gap 8 mm
Piston Diameter 215mm
Sd 0.0363 sqM
Vas 25.634 L (paralleled)
Fs 45.479 Hz (paralleled)
Qts 0.4017 (paralleled)
Qes 0.4256 (paralleled)
Mms 89.393 g (paralleled)
Mmd 85.416 g (paralleled)
Rms 3.41 kgs-1 (paralleled)
BI 10.679 TM (paralleled)
Speaker Displacement 39.93 CM3(paralleled)
Xmax 11mm
Magnet Weight 85.5 oz
this is anouther 10" sub from clarion. SRW1085
im looking for anouther ported box.
this sub is last year's modle i think.
and like above im still got to get the max size for the box
Outside Dia 266 mm
Mounting Hole 228 mm
Mounting Depth 145 mm
Sensitivity 79 dB
Max. Peak Music 500 W
Continuous Power 250 W
Nominal Impedance 4+4 ohm
Re DC Imp (± 10%) 3+3 ohm
Le 0.5/2.1 mH
V.C. Diameter 38.55 mm
V.C. Length 41.71 mm
Air Gap 8 mm
Piston Diameter 50 mm
Sd 195 mm
Vas 46.3/45.0 L
Fs 29 Hz
Qts 0.88/0.85
Qes 0.97/0.94
Mms 94.5/100.4 gr
Mmd 100 g
Rms 2.1/2.2 kg/s
BI 5.3/11.1 N/A
Speaker Displacement 2.9 L
Xmax 9.15 mm
Magnet Weight 35.4 OZ
this is hte max it can go, but i'll duble check on that. 12"Widthx36"Lengthx17"hieght
thank's to any one who help's out
[ March 24, 2005, 12:24 PM: Message edited by: lumina guy ]
o srry mabey i should have stated that i don't own these. im just looking what one will give me more bang for my buck. and if i do buy one of these i will buy them as a set. so i have 2 matching sub's.
srry for the mix up
srry for the mix up
Guest
Posts: n/a
The XW1000 will stomp the SRW1085, any day of the week. Put the SRW1085 on ebay..
I reviewed the XW1000 for PAS and really liked it.
For a single the XW1000, use the following enclosure design:
1.71 cubic feet net internal volume.
Single 4" diameter round port with a length of 12.8 inches.
That'll kick butt!
I reviewed the XW1000 for PAS and really liked it.
For a single the XW1000, use the following enclosure design:
1.71 cubic feet net internal volume.
Single 4" diameter round port with a length of 12.8 inches.
That'll kick butt!


