Need a hand building a box in Edmonton
#1
Need a hand building a box in Edmonton
I need a hand building a simple ported box for my Jeep. I have pretty much all the tools needed short of a table saw in my work trailer, but I'm an apartment dweller so I don't really have anywhere to build it. It could be done on my job site if need be.
I'm sure I *could* do it on my own, but it's nice to have somebody around who knows what they're doing just to make sure everything is correct.
The subs are in a Bassworx box that sucks **** right now, but I used to have them in separate 1.3 cube(ish) enclosures, each with an 18" long 3" ABS port (I'm pretty sure it was 3" ABS but there's a possibility it was 4") I will only be using one of the subs.
So overall it should be fairly straightforward, maybe only a few hour long project? I'm willing to supply beer, smokables (if you're into that ) and toss a few bucks to anybody who's interested in giving me a hand.
I'm sure I *could* do it on my own, but it's nice to have somebody around who knows what they're doing just to make sure everything is correct.
The subs are in a Bassworx box that sucks **** right now, but I used to have them in separate 1.3 cube(ish) enclosures, each with an 18" long 3" ABS port (I'm pretty sure it was 3" ABS but there's a possibility it was 4") I will only be using one of the subs.
So overall it should be fairly straightforward, maybe only a few hour long project? I'm willing to supply beer, smokables (if you're into that ) and toss a few bucks to anybody who's interested in giving me a hand.
#3
That's a good idea. I think last time I bought plywood at Home Depot they gave me 2 free cuts and then charge a small amount for any after that.
I won't have time to do it this weekend, maybe next depending on how my work schedule goes. I suppose I should get started on my box design.
I won't have time to do it this weekend, maybe next depending on how my work schedule goes. I suppose I should get started on my box design.
Thread
Thread Starter
Forum
Replies
Last Post
Brian Sanders
Canadian General Car Audio Discussion
44
04-13-2010 11:56 PM