looking for someone to build me a ported box for 2 PREMIER TS-W3001D2 12" will pay located in toronto but will travel 50 km or so... thanks

 

im watching this thread as I have the same subs lol

 

URBAN DISTURBANCE
519-888-1945 ask for Dave tell him Ray told ya to call.
Now it's in Kitchener but well worth the extra 10 min.

 

dave has a shop now?, or is he still building on the side

 

thanks a bit far but if no ones offers i might as well

 

well I just built my box today outside dimensions are 35" wide x 14" high x 24" deep, the port is 5" wide and 12.5" long I believe it is tuned to 35.6 htz and is 4.2 after displacement, we will see how this works sometime very soon and I will post my results for ya


btw waht amp will you be using to push your 3001 subs?

 

hifonics the 2000 rms one
lol if it works out good mind building me one =(

 

okay i got a box a few days ago it's a Q logic box 1.25 cu. ft. and 1.2 is recommended so it's close the max is 1.6 and min is 0.8 cu. ft. but here is my problem the ports on this box is at the top is that okay because the ports for this sub is 3" dia x 3.5" so 3 inch circle by 3.5" long would this be because it's like a few inchs away in the box from touching sub (the port) thanks

 

Way too small of ports for the subs. I would recommend running even just one in no less then 2 cu,ft int. So over 4 cu.ft. for 2with at least 60 sq in of port.