8s
#23
I feed 4 MTX 5508-44s 300rms each in 3cuft tuned to 35hz. Technically the box is oversized and I am overpowering them by 50% but they never complain. I've been beating the snot out of them for 3 years and no failures. For $150 or so a pop, I'm really happy with them.
And whoever mentioned 'missing' the lows - no.
And whoever mentioned 'missing' the lows - no.
#29
These are not 8's, maybe 7's, 6's?...they are on sale for $37.50 U.S., cheap enough? 200/400 WRMS. 10 of them would be pretty "wow".
DISCLAIMER: I don't work for, or sell eD products and am in no way affiliated or receive any type of consideration from Elemental Designs.
I do however own some of their products, and like them. This is just information from one enthusiast to another.
Qts: .29
Qes: .30
Qms: 10.5
Fs: 28.00Hz
Re: 3.2
Vas: 22L
Mms: 50.0g
Bl: 13.30T*m
SPL: 85dB
Sd: 114cm²
Xmax: 13.0mm
Voice Coil: 38.0mm
Magnet Width: 5.000"
Cutout Diameter: 6.000"
Mounting Depth: 3.500"
Weight: 7lb
Total Height: 3.500"
Displacement: .04 ft³
Outside Diameter: 7.250"
DISCLAIMER: I don't work for, or sell eD products and am in no way affiliated or receive any type of consideration from Elemental Designs.
I do however own some of their products, and like them. This is just information from one enthusiast to another.
Qts: .29
Qes: .30
Qms: 10.5
Fs: 28.00Hz
Re: 3.2
Vas: 22L
Mms: 50.0g
Bl: 13.30T*m
SPL: 85dB
Sd: 114cm²
Xmax: 13.0mm
Voice Coil: 38.0mm
Magnet Width: 5.000"
Cutout Diameter: 6.000"
Mounting Depth: 3.500"
Weight: 7lb
Total Height: 3.500"
Displacement: .04 ft³
Outside Diameter: 7.250"