Have any of you used a biscuit jointer to build an enclosure? I'm not sure if the weak "end grain" of the MDF would split from the biscuit expanding.

I guess if you stay in far enough from the edges it should be alright...I don't know, what are your experiences?

 

i use them for building boxes.they will not split your wood.it puts the grove right in the middle of the wood.all your pannles will line up perfectly. and will be a very strong bond.

there are bit you can buy for a router that will do the same thing but i have never used one and they are probly expencive.

 

Good to hear. I use one all the time for making cabinets etc...for some reason I never thought of using it for an enclosure before.

Thanks.

 

AGH Scarry man again. [img]tongue.gif[/img]

X

 

I have used a biscuit jointer on almost every one of my boxes. Worked very well. I like overkill [img]tongue.gif[/img]

 

If you need a source: http://www.leevalley.com/wood/page.a...50,43217,43231

or

http://www.leevalley.com/hardware/pa...=3,41306,41319

http://www.leevalley.com/wood/page.a...ry=1,110,42967

[img]smile.gif[/img]

 

You sir are going to give me a complex, sir. [img]graemlins/cry.gif[/img]

 

^^^this is gonna sound "New" what is "rabbiting" the edges? I might know what your talking about but I might just call them something else.