Blew 'em up, need new ones, but wich ones??
Hi everybody, I'm in need of some advice. I Finally blew up my 5 year old 12" Fosgate HE2's and now I need replacements. I'm running a Memphis ST1000D at a 1 ohm load. I looked at the new Fosgate T1's, but $400.00 a piece is a little steep for me right now. Is there any other subs out there that will sound as good (or better) the the HE2's, and put a 1 ohm load on the amp for less than $400.00 each?? btw, the sub box is ported and I think has about 4.5 cubic feet per sub, and is tuned to about 33Hz.
Thanks Shawn |
You can use Clarion PXW1252 1000WPeak/500Wrms www.clarioncanada.com or Powerbass L12D www.powerbassusa.com Both are around $200 each.
|
4.5 feet PER sub? Thats pretty hefty for a 12"
|
^^^^^ x's 2 ^^^^^^^
|
Oh crap.....just noticed he said 4.5 per sub. What do you drive? A winabago? Im not sure if you know how to calculate the volume. (Not being a smartass here) Width x Height x depth internal measurments divided by 1728. Will give you Cbft. Sorry just not sure if you knew. 4.5 is hugh per sub. Could you have meant for both?
|
No, it's around 4.5 per sub. The box is in the bed of a dakota and the cab is cut through with accordian boot for a seal. The sub box easily takes 1/3 or better of the entire truck box. It's huge. My installer did a thread on here about the build with some pics. I'll see if I can find it.
|
Wow that is big
|
are they slot ports if so they may take up a good bit of air space .
|
i think he drive a god dam bus!... maby a vw euro van lol
|
That's a big box. Personally I would try to revise it to either make it smaller, or make it accept 2 15s, or make it accept 4 12s.
You will be hard pressed to find a modern car 12" that works well in that big a box. |
All times are GMT -5. The time now is 02:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands