Fi Audio
11-18-2006, 01:18 AM
#1
Fi Audio
anyone have any experience with them? i know the originators of RE started this company, only bad thing i heard is there customer service isnt all that great...like if u need a recone it will be a pain in the *** to get it done. But i hear there a great sub at a VERY reasonable price IMO
https://ssl.perfora.net/www.ficaraud...dex.shopscript
im looking into the BTL line
The BTL Series does what others cant. It allows you to tailor your subwoofer for your exact extreme SPL needs. Starting with our standard double stacked motor and 8 layer flat wind voice coil, you can tweak things with a variety of options. Need more power handling? Add a chamfered pole or axial cooling channels. Need incredible Xmax to feed your 160dB at 20Hz obsession? Add a third magnet and our extended length coils (26mm of Xmax). With over 20 different options to choose from, we can build the exact sub you need to fuel your SPL fire.
BTL Series: 10”, 12”, 15”, and 18”
Dual 1 and Dual 2 Ohm (custom options available)
Cast basket
Wrap around gasket
Kraft pulp fiber reinforced cone
Single layer wide foam surround
Push terminals
Extreme lead wire
FEA optimized motor
3” diameter 8 layer coil (High Xmax coil option)
Double stack magnets (option for third)
Quad progressive spiders
And many other custom options
and im not sure if i would go with a 12 or 15
BTL12
DUAL 1 | DUAL 2
Fs: 40.7 Hz | 39.8 Hz
Re: 0.7 Ohms/coil | 1.5 Ohms/coil
Qms: 4.91 | 5.03
Qes: .22 | .21
Qts: .21 | .20
Mms: 191g | 201g
Cms: 0.80mm/N | 0.80mm/N
Sd: 480cm^2 | 480cm^2
Vas: 25.7 l | 25.7 l
Spl: 90.7dB 1W/1m | 90.7dB 1W/1m
Bl: 17.5 N/A | 26.9 N/A
Xmax: 16mm * | 16mm *
Xmax: 16mm * | 16mm *
Rms: 2000W * | 2000W *
Sealed box: N/A cuft | N/A cuft
Ported box: 0.0 cuft | 0.0 cuft
Sub OD: 12.500” | 12.500”
Cut ID: 11.125” | 11.125”
Mounting depth: 6.750” * | 6.750” *
Displacement: 0.18cuft * | 0.18cuft *
Product code: 00212
Price: $ 359.00
*shipping is included
BTL15
DUAL 1 | DUAL 2
Fs: 36.7 Hz | 36.1 Hz
Re: 0.7 Ohms/coil | 1.5 Ohms/coil
Qms: 5.62 | 5.71
Qes: .25 | .23
Qts: .24 | .23
Mms: 241g | 249g
Cms: 0.78mm/N | 0.78mm/N
Sd: 810cm^2 | 810cm^2
Vas: 71.7 l | 71.7 l
Spl: 93.3dB 1W/1m | 93.4dB 1W/1m
Bl: 17.5 N/A | 26.9 N/A
Xmax: 16mm * | 16mm *
Rms: 2000W * | 2000W *
Sealed box: N/A cuft | N/A cuft
Ported box: 0.0 cuft | 0.0 cuft
Sub OD: 15.625” | 15.625”
Cut ID: 14.125” | 14.125”
Mounting depth: 8.250” * | 8.250” *
Displacement: 0.21cuft * | 0.21cuft *
Product code: 00215
Price: $ 379.00
https://ssl.perfora.net/www.ficaraud...dex.shopscript
im looking into the BTL line
The BTL Series does what others cant. It allows you to tailor your subwoofer for your exact extreme SPL needs. Starting with our standard double stacked motor and 8 layer flat wind voice coil, you can tweak things with a variety of options. Need more power handling? Add a chamfered pole or axial cooling channels. Need incredible Xmax to feed your 160dB at 20Hz obsession? Add a third magnet and our extended length coils (26mm of Xmax). With over 20 different options to choose from, we can build the exact sub you need to fuel your SPL fire.
BTL Series: 10”, 12”, 15”, and 18”
Dual 1 and Dual 2 Ohm (custom options available)
Cast basket
Wrap around gasket
Kraft pulp fiber reinforced cone
Single layer wide foam surround
Push terminals
Extreme lead wire
FEA optimized motor
3” diameter 8 layer coil (High Xmax coil option)
Double stack magnets (option for third)
Quad progressive spiders
And many other custom options
and im not sure if i would go with a 12 or 15
BTL12
DUAL 1 | DUAL 2
Fs: 40.7 Hz | 39.8 Hz
Re: 0.7 Ohms/coil | 1.5 Ohms/coil
Qms: 4.91 | 5.03
Qes: .22 | .21
Qts: .21 | .20
Mms: 191g | 201g
Cms: 0.80mm/N | 0.80mm/N
Sd: 480cm^2 | 480cm^2
Vas: 25.7 l | 25.7 l
Spl: 90.7dB 1W/1m | 90.7dB 1W/1m
Bl: 17.5 N/A | 26.9 N/A
Xmax: 16mm * | 16mm *
Xmax: 16mm * | 16mm *
Rms: 2000W * | 2000W *
Sealed box: N/A cuft | N/A cuft
Ported box: 0.0 cuft | 0.0 cuft
Sub OD: 12.500” | 12.500”
Cut ID: 11.125” | 11.125”
Mounting depth: 6.750” * | 6.750” *
Displacement: 0.18cuft * | 0.18cuft *
Product code: 00212
Price: $ 359.00
*shipping is included
BTL15
DUAL 1 | DUAL 2
Fs: 36.7 Hz | 36.1 Hz
Re: 0.7 Ohms/coil | 1.5 Ohms/coil
Qms: 5.62 | 5.71
Qes: .25 | .23
Qts: .24 | .23
Mms: 241g | 249g
Cms: 0.78mm/N | 0.78mm/N
Sd: 810cm^2 | 810cm^2
Vas: 71.7 l | 71.7 l
Spl: 93.3dB 1W/1m | 93.4dB 1W/1m
Bl: 17.5 N/A | 26.9 N/A
Xmax: 16mm * | 16mm *
Rms: 2000W * | 2000W *
Sealed box: N/A cuft | N/A cuft
Ported box: 0.0 cuft | 0.0 cuft
Sub OD: 15.625” | 15.625”
Cut ID: 14.125” | 14.125”
Mounting depth: 8.250” * | 8.250” *
Displacement: 0.21cuft * | 0.21cuft *
Product code: 00215
Price: $ 379.00
Last edited by _HeC_; 11-18-2006 at 01:22 AM.
12-13-2006, 01:28 PM
#3
All subs are hand made to order and are designed by Scott from RE.
I have had great customer service so far. If you want some more info, pop by their official forum where you can get any answers you want.
As for the BTL, they are able to Handle alot more then the rated with upgrades...
http://www.soundsolutionsaudio.com/forum/index.php?showforum=51
I have had great customer service so far. If you want some more info, pop by their official forum where you can get any answers you want.
As for the BTL, they are able to Handle alot more then the rated with upgrades...
http://www.soundsolutionsaudio.com/forum/index.php?showforum=51
Thread
Thread Starter
Forum
Replies
Last Post
vrdublu
Car Audio For Sale
19
08-30-2013 02:48 AM
