Help with sub choice.
#1
Help with sub choice.
Hoping someone can give me some suggestions.
I have a 2010 Tundra about to do a system in it under the back seat. I have a Pioneer AVIC-z120BT headunit, diamond audio 600.1 and 300.4 speaker amp and Diamond Hex Pro Components. Only thing in the truck right now is the deck. So need help with sub choices. I am tossed up between the Alpine Flat Type R 10" or 2 JL 8w3's. I don't need anything crazy just some kick. I don't have a lot of height under the seat. What's every ones opinion.
I have a 2010 Tundra about to do a system in it under the back seat. I have a Pioneer AVIC-z120BT headunit, diamond audio 600.1 and 300.4 speaker amp and Diamond Hex Pro Components. Only thing in the truck right now is the deck. So need help with sub choices. I am tossed up between the Alpine Flat Type R 10" or 2 JL 8w3's. I don't need anything crazy just some kick. I don't have a lot of height under the seat. What's every ones opinion.
#4
SPECIFICATIONS OF D2 Coil :
RE: 3.28 ohms (series)
FS: 41.6 Hz
Qes: 0.513
Qms: 6.606
Qts: 0.476
Le: 2.778 mH
Vas: 3.285 L
BL: 17.138 N/A
Cms: 83.341 um/N
Mms: 175.654 g
Sens: 78.476 dB @ 1w/1m
Dual-4 SA-8 Specs:
RE: 6.08 ohms
Fs: 44.66 Hz
Qes: 0.594
Qms: 6.337
Qts: 0.545
Le: 4.26 mH
VAS: 4.44 L
BL: 21.20 N/A
Cms: 80.8 uM/N
Mms: 157 g
Sens: 80.06 @ 1w/1m
BL^2/RE: 73.92
POWER: 400 RMS
5.25" depth
8.25" overall basket OD (no gasket)
7.375" cut-out diameter (without gasket)
7.25" cut-out diameter (with gasket)
6.25" magnet diameter
We suggest 0.6 - 1 cube ported tuned to 30-40 hz based on your goals and preferences. Sealed can be utilized but is not optimal for these drivers.
There's also the E8v2, lower power handling and its not quite a beefy.
RE: 3.28 ohms (series)
FS: 41.6 Hz
Qes: 0.513
Qms: 6.606
Qts: 0.476
Le: 2.778 mH
Vas: 3.285 L
BL: 17.138 N/A
Cms: 83.341 um/N
Mms: 175.654 g
Sens: 78.476 dB @ 1w/1m
Dual-4 SA-8 Specs:
RE: 6.08 ohms
Fs: 44.66 Hz
Qes: 0.594
Qms: 6.337
Qts: 0.545
Le: 4.26 mH
VAS: 4.44 L
BL: 21.20 N/A
Cms: 80.8 uM/N
Mms: 157 g
Sens: 80.06 @ 1w/1m
BL^2/RE: 73.92
POWER: 400 RMS
5.25" depth
8.25" overall basket OD (no gasket)
7.375" cut-out diameter (without gasket)
7.25" cut-out diameter (with gasket)
6.25" magnet diameter
We suggest 0.6 - 1 cube ported tuned to 30-40 hz based on your goals and preferences. Sealed can be utilized but is not optimal for these drivers.
There's also the E8v2, lower power handling and its not quite a beefy.
Thread
Thread Starter
Forum
Replies
Last Post