I think I blew my brand new Alpine Type X sub
#31
So your SUB was fine after all Jay???
Did it have any smell the Sub mean jay
I had 2 10 type x's
Sold one to Rick Barnes
I never did find out what it went in LOL and what he thought of it
I never knew when the explicitcontentz meets were or split stream
Did it have any smell the Sub mean jay
I had 2 10 type x's
Sold one to Rick Barnes
I never did find out what it went in LOL and what he thought of it
I never knew when the explicitcontentz meets were or split stream
#32
If you have any outside noise when imprinting.......Bass levels are very low.I tune mine at the shop with everything of (ovehead balast lights and all)I also set my x-over to the sub on the amp very low and turn the gain and x-over poing up when im done.
#33
Imprint is designed to give an all around audio balance.
#35
Mids can go as low as 50hz or even lower - Yes they may scream but how much is stressed and digitally eq'ed to hell! I personally feel the imprint is a waste since you cannot adjust it period especially for BASSHEADs.
When you introduce no sound in the low frequency area - the imprint "WILL" adjust for the lack of sound in those area and can affect your mids.
Remember - Imprint is Balanced Sound not Boomy sound!
When you introduce no sound in the low frequency area - the imprint "WILL" adjust for the lack of sound in those area and can affect your mids.
Remember - Imprint is Balanced Sound not Boomy sound!
#36
in my previous experience (10-15PDX amps matched with alpine decks) the gain setting must be set on the lower side 1-2v. up the fuses to the next level (I know it sounds crazy but i've talked to the alpine techs and its true, the fuse rating stock is too low). and they need decent power or they go into protection so upgrade battery, wires, etc.. with these amps they either suck or whale. I was not impressed at all when i first got my 3X1.1000 and my 4.150 but after the above fixes, wow. running 3 type x 10's.
#37
in my previous experience (10-15PDX amps matched with alpine decks) the gain setting must be set on the lower side 1-2v. up the fuses to the next level (I know it sounds crazy but i've talked to the alpine techs and its true, the fuse rating stock is too low). and they need decent power or they go into protection so upgrade battery, wires, etc.. with these amps they either suck or whale. I was not impressed at all when i first got my 3X1.1000 and my 4.150 but after the above fixes, wow. running 3 type x 10's.
#38
in my previous experience (10-15PDX amps matched with alpine decks) the gain setting must be set on the lower side 1-2v. up the fuses to the next level (I know it sounds crazy but i've talked to the alpine techs and its true, the fuse rating stock is too low). and they need decent power or they go into protection so upgrade battery, wires, etc.. with these amps they either suck or whale. I was not impressed at all when i first got my 3X1.1000 and my 4.150 but after the above fixes, wow. running 3 type x 10's.
Last edited by cavy man14; 08-27-2008 at 10:24 PM.