Car Audio Forumz - The #1 Car Audio Forum

Car Audio Forumz - The #1 Car Audio Forum (https://www.caraudioforumz.com/)
-   General Discussion (https://www.caraudioforumz.com/general-discussion-10/)
-   -   Im putting an aftermarket deck in a 97 monte carlo tomorrow. (https://www.caraudioforumz.com/general-discussion-10/im-putting-aftermarket-deck-97-monte-carlo-tomorrow-62943/)

smith 04-24-2008 08:06 PM

Im putting an aftermarket deck in a 97 monte carlo tomorrow.
 
Do I need to know anything special before I do? Its got this 8 speaker system in it..which is going to be taken out anyways. I'm also putting new front and rear speakers in it so the car will only have 4 after.

I was just wondering if there were more than 4 channels. I'm trying to ask if the fronts are all chained together, or if they each have their own channel. Same with the back.

Thanks.

Father Yuli 04-24-2008 11:26 PM

this car might have a factory amp. just get the harness adapter for the deck to be able to plug into the factory harness.

Tom.F.1 04-25-2008 08:41 AM

My car had the 8 speaker system. The deck has 4 twisted pair line outs, going to an amp with crossovers. front, rear, left, right, high, low. 2+2 x 2 = 8.
Its all here sitting in a box in the garage if anybody wants it.

The 97 should be pretty straight forward on power, but you'll need to run new spealer wire.

smith 04-25-2008 03:19 PM

He wants to put in 4 new speakers and run it off the deck for now (eventually they are going to be powered off a new amp), that means I need to run all new speaker wire?

Also, do I 100% need this adaptor thing..I'm guessing they will have it at bestbuy?

Smoke_31 04-25-2008 05:49 PM

If you want to run the factory speakers off your deck for the time being, the harness would be a big help!

smith 04-26-2008 02:09 PM

Im doing it right now but were doing the full install. Anyone know where I can run a power wire through the firewall without drilling a hole.

92zed34 04-26-2008 02:54 PM


Originally Posted by smith (Post 335092)
Im doing it right now but were doing the full install. Anyone know where I can run a power wire through the firewall without drilling a hole.


Why are you afraid of drilling a new hole? I try to do it 4-5 times a week according to my gf.
I know the monte/luminas are tight but your pretty much gonna have to, i put off my amp install a bit cause it just looked impossible under the hood to get a wire thru lol fukin 3.4l gms are such a treat to work on:mad:

Tom.F.1 04-28-2008 03:05 AM


Originally Posted by smith (Post 335092)
Im doing it right now but were doing the full install. Anyone know where I can run a power wire through the firewall without drilling a hole.

I know i'm a couple days late but maybe you figured it out already?
Down under the dash, passenger side, all the original wiring goes thru a big rubber block, filled with epoxy for every chassis wire there is.

There is lots of room to drill a 1/2 inch hole in the rubber block.

smith 04-28-2008 05:08 PM

Where can I buy a grommet to go with it? thanks.

Tom.F.1 04-29-2008 01:22 AM

Princess Auto in Whitby, Thickson-401. Hi-Fi Center on Dundas-Anderson.


All times are GMT -5. The time now is 12:24 AM.


© 2024 MH Sub I, LLC dba Internet Brands