JL 300/4 with Boston S75's?
Hello all, i registered my account here a while back when i did my system, but never got around to posting. (Fellow Canadian)
My system is a ext cab truck with 4 boston acoustics S75's running off what ever was the cheapest at the time Sony head unit. And a JL 500/1 driving two boston acoustics 10" G1's. I ended up finding the JL 500/1 used for 400 bucks just over a year ago. In the future i want to get a better head unit, but its not a priority, so unless i find a good sale or used one it probably wont happen for a while. Looking in the same classifieds, i found JL 300/4 $250 JL 500/1 $250 Or take both for $450.00 Will the 300/4 work with my Boston S75's? If the 300/4 is too powerful, can i tone it down so it does not blow my speakers(then when i get around to it, getting speakers to use the full potential of the amp?) What your thoughts? I would plug his 500/1 into where my 500/1 is to make sure it worked, but is there any way to test if the 300/4 works? Thanks Rob |
No one?
|
You'll sell the jl 500/1 for $100?
|
Originally Posted by Stealth1317
(Post 501148)
You'll sell the jl 500/1 for $100?
I just need to know if the 300/4 will be ok with my speakers, and how to test if it works. |
i would buy if you'd sell it :s prices in saskatchewan are wayy too high...
|
The 300/4 is a great amp. You'll be more than pleased with it.
|
I just realized, my deck has 1 set of sub pre outs (used by my current 500/1) but it does not have any front or rear pre outs. Can i just plug RCA's into the pre out on the back of my 500/1 (that uses the sub pre out), then run a splitter to make it go into the front/rear RCA's on the 300/4? Big quality lose? Will it even work running a amp for speakers off a "sub pre out"?
Or am i out of luck unless i get a new deck? |
Ouch, ya your pretty limited. The 300/4 doesn't have any RCA outputs either. You could use the 500/1 output, but would still only have one RCA. You could set it to 2ch and still run all 4 channels, just won't have front to rear fade.
|
Originally Posted by N130Gv2
(Post 501180)
Ouch, ya your pretty limited. The 300/4 doesn't have any RCA outputs either. You could use the 500/1 output, but would still only have one RCA. You could set it to 2ch and still run all 4 channels, just won't have front to rear fade.
So from reading around, can i set my deck to "rear out", run a RCA to my 500/1. Then run a RCA from the pre outs on the back of the 500/1 into a splitter (Assuming i can get one) and then run each into my 300/4? |
Originally Posted by toyzzz
(Post 501179)
I just realized, my deck has 1 set of sub pre outs (used by my current 500/1) but it does not have any front or rear pre outs. Can i just plug RCA's into the pre out on the back of my 500/1 (that uses the sub pre out), then run a splitter to make it go into the front/rear RCA's on the 300/4? Big quality lose? Will it even work running a amp for speakers off a "sub pre out"?
Or am i out of luck unless i get a new deck? The outputs on the 500/1 can be set to HP mode and the frequency dialed in on that amp.......a single set of RCAs to the 300/4 will feed all 4 channels there and you can use the HP filters in the 300/4 to fine tune the sound for the mids and highs....:smokin: HTH |
All times are GMT -5. The time now is 02:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands