JVC KD-G710 Deck, Sub Hook-Up Question!
10-01-2007, 01:09 PM
#1
JVC KD-G710 Deck, Sub Hook-Up Question!
Hey guys. I'll finally soon be able to get my sub setup (hard being a student 
) but, since I won't be able to install it myself, as I deffinatly wouldn't do it right, I have a few questions to ask you guys, who actully know car audio, before I take it to the guy who's installing it for me. First off, my deck, a JVC KD-G710, doesn't have an option to adjust the subs, the one that is a step above it does. So, that makes me wonder do I have a sub-output in the back of the deck? I'd check myself, but I just don't have the time to, so can anyone tell me? Also, if it doesn't have those sub-outs, do I have to go out a buy a deck that does, or can it be wired up anyway. In advance, I appreciate your help. Thanks a lot,
Hodder
) but, since I won't be able to install it myself, as I deffinatly wouldn't do it right, I have a few questions to ask you guys, who actully know car audio, before I take it to the guy who's installing it for me. First off, my deck, a JVC KD-G710, doesn't have an option to adjust the subs, the one that is a step above it does. So, that makes me wonder do I have a sub-output in the back of the deck? I'd check myself, but I just don't have the time to, so can anyone tell me? Also, if it doesn't have those sub-outs, do I have to go out a buy a deck that does, or can it be wired up anyway. In advance, I appreciate your help. Thanks a lot,Hodder
10-01-2007, 01:32 PM
#2
JVC KDG710
Power Output: 20W x 4 (RMS) 50 W X 4 Max
MOS-FET Power Amp
Dot Matrix Display
MP3/WMA Compatible
SIRIUS Ready
HS-II Tuner
Motorized Slide-Out Facepalte
3-Band Parametric iEQ
4V Line Out Level
Line Output Terminals (F/R)
24-Bit Resolution Burr-Brown 1-Bit DAC
Switchable Dimmer
More Info:
Power Output (RMS) 20W x 4
Power Output (Max.) 200w (50W x 4)
MOS-FET Power Amp
CD-R/RW Compatible
MP3/WMA Compatible
Sirius Ready
3-Band Parametric iEQ
cEQ (NO)
Dot Matrix Display
MP3/CD Changer Control
Multi Color LCD (NO)
Wireless Remote Control
24-Bit Resolution Burr-Brown 1-Bit DAC
Front Aux Input
CD Text
Line Output Terminals (front and rear Sub)
Line Output Level 4V
Motorized Slide-Out Face
Flip-Down Face (NO)
Detachable Control Panel with Carrying Case
Switchable Dimmer
Preferred Setting Mode
COMPU Play
Do you want the manual too? Your rear outs can be switched to sub, then you adjust sub level with fader. I used to have a 97 Z24, sold it for scrap with 368K on it about 18 months ago.
Power Output: 20W x 4 (RMS) 50 W X 4 Max
MOS-FET Power Amp
Dot Matrix Display
MP3/WMA Compatible
SIRIUS Ready
HS-II Tuner
Motorized Slide-Out Facepalte
3-Band Parametric iEQ
4V Line Out Level
Line Output Terminals (F/R)
24-Bit Resolution Burr-Brown 1-Bit DAC
Switchable Dimmer
More Info:
Power Output (RMS) 20W x 4
Power Output (Max.) 200w (50W x 4)
MOS-FET Power Amp
CD-R/RW Compatible
MP3/WMA Compatible
Sirius Ready
3-Band Parametric iEQ
cEQ (NO)
Dot Matrix Display
MP3/CD Changer Control
Multi Color LCD (NO)
Wireless Remote Control
24-Bit Resolution Burr-Brown 1-Bit DAC
Front Aux Input
CD Text
Line Output Terminals (front and rear Sub)
Line Output Level 4V
Motorized Slide-Out Face
Flip-Down Face (NO)
Detachable Control Panel with Carrying Case
Switchable Dimmer
Preferred Setting Mode
COMPU Play
Do you want the manual too? Your rear outs can be switched to sub, then you adjust sub level with fader. I used to have a 97 Z24, sold it for scrap with 368K on it about 18 months ago.
Last edited by Tom.F.1; 10-01-2007 at 01:34 PM.
10-01-2007, 01:37 PM
#3
Excellent man, I appreciate the info and help. So, to my understanding, the lines will hook on those rear outputs, which there are 2 of, and I can adjust how loud they are by fading it more to the rear for louder, and more to the forward to turn them down, which makes sense. But, I don't understand how you can "switch" the rear outs to run a sub?
Thread
Thread Starter
Forum
Replies
Last Post
