Kenwood Excelon KFC-XT14
I was wondering if anyone else has opened the crossover for these tweeters? I was looking at it, I followed where the current for the positive input goes, and at the end of it, the output, it switched polarity and goes to negitive. The neg input doesn't run through anything and goes straight to the positive output. Anyone know why they would do this?
|
What topology is the crossover? A common trait with some kinds of crossovers, such as a 2nd order Butterworth, is that the speakers are out of phase at the crossover frequency so some designers will invert the polarity of one of the drivers to compensate for it.
|
I'm not sure what type of crossover it is?
|
Neither do I - I was just offering a reason that it may be like that :ohwell:
|
its probably a 12 db per octive crossover
the reason the polarity is reversed is that crossover puts the tweeter 180 degrees out of phase so reversing the polarity puts it back in phase |
Originally Posted by robmar
its probably a 12 db per octive crossover
the reason the polarity is reversed is that crossover puts the tweeter 180 degrees out of phase so reversing the polarity puts it back in phase |
All times are GMT -5. The time now is 08:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands