My New Project
#14
Not rescreened - mine had some good scrapes from a underseat install, plus getting it screened looked to be an expensive option. Scanning the surface didn't work too well since some of the lettering was pretty messed up.
Believe it or not, I did the whole face on a word processor and printed it (this was 7 years or so ago). Took hours to get it to line up with the holes. Then printed it, and overlayed a clear label to protect the printing. Finally cut all the holes out, and voila! It may be "on the cheap", but looks fine with a shroud - that had to happen anyway because one mounting flange is all f***ed up from that brutal underseat install.
Mk
[ June 26, 2004, 12:38 PM: Message edited by: NOBASS ]
Believe it or not, I did the whole face on a word processor and printed it (this was 7 years or so ago). Took hours to get it to line up with the holes. Then printed it, and overlayed a clear label to protect the printing. Finally cut all the holes out, and voila! It may be "on the cheap", but looks fine with a shroud - that had to happen anyway because one mounting flange is all f***ed up from that brutal underseat install.
Mk
[ June 26, 2004, 12:38 PM: Message edited by: NOBASS ]
#15
It has a warmed-over 350. Edlebrock 4bbl, Dart II Sportsman intake, headers, 30 overbore, stock cam and heads though I am pretty sure. And the TH350 has a shift kit.
Nobass, the 3401 looks good! Still have the file with all the letting and stuff so I can redo mine? [img]graemlins/deal4u.gif[/img] 3401R?
Nobass, the 3401 looks good! Still have the file with all the letting and stuff so I can redo mine? [img]graemlins/deal4u.gif[/img] 3401R?
#16
Sux, show us some pics of those kicks when they are in the truck, please?
I want to see how so0mething like that would fit in my truck, footroom wise. (yeah, I know there is a continent of room, but I am about that area what with dirt/water/etc...)
I want to see how so0mething like that would fit in my truck, footroom wise. (yeah, I know there is a continent of room, but I am about that area what with dirt/water/etc...)
#17
Will do. They are bigger than they need to be, as the 4 I am using is quite deep. Most others would mean a shallower kick, and it doesn't have to be as long either. Next time around, I plan on sinking a 5 1/4" flush into the kick panel metal to play into the door jamb area (not the vent area which is separate) and then recess the tweet into the vent area, which is okay as it doesn't need to use that cavity for airspace.
#18
SUX, after posting the reply I have been digging through my old CDR backups looking for that file (after all, that was 2 O/Ss ago!). Next stop will be the four boxes of floppies (oh joy), but if I have it its yours.
As for the 3401R, it went red first but that obviously wasn't going to work with a white label! So I guess I should have changed it to be a 3401W.
As for the 3401R, it went red first but that obviously wasn't going to work with a white label! So I guess I should have changed it to be a 3401W.
Thread
Thread Starter
Forum
Replies
Last Post
PT-Chris
General Discussion
22
06-26-2006 12:17 AM