New Amp....
#14
with two type x s you couild get a final load of 1 or 4 ohms, so you would have
2 x 1100-Watts....RMS @ 2-Ohms.
or
1 x 2000-Watts....Bridged Mono @ 4-Ohms
why not buy a smaller amp that you could use to its full potencial and save money. unless you plan on upgradeing your subs later.
2 x 1100-Watts....RMS @ 2-Ohms.
or
1 x 2000-Watts....Bridged Mono @ 4-Ohms
why not buy a smaller amp that you could use to its full potencial and save money. unless you plan on upgradeing your subs later.
#15
Guest
Posts: n/a
Originally Posted by andreman
with two type x s you couild get a final load of 1 or 4 ohms, so you would have
2 x 1100-Watts....RMS @ 2-Ohms.
or
1 x 2000-Watts....Bridged Mono @ 4-Ohms
why not buy a smaller amp that you could use to its full potencial and save money. unless you plan on upgradeing your subs later.
2 x 1100-Watts....RMS @ 2-Ohms.
or
1 x 2000-Watts....Bridged Mono @ 4-Ohms
why not buy a smaller amp that you could use to its full potencial and save money. unless you plan on upgradeing your subs later.
type-x's are 1000watt rms and 3000watt peek...
so if i do 1x 2000watts....bridged mono @ 4ohms wouldnt that be perfect?
or even the 2 x 1100-Watts....RMS @ 2-Ohms
#19
Guest
Posts: n/a
Originally Posted by andreman
i mean he wont be able to get the full pottencial of the amp because his subs dont have the correct voice coil configuration.
DVC 4ohm...
bridge the amp to 1 channel and subs to 4 ohm or 2 ohm...
then get 3200watts @2ohm to 2 subs = 1600watts a sub...
or bridge subs at 4ohm and get 2000watts = 1000watts a sub...
now you tell me how i wont get full pottencial out of the amp!?
#20
how is that!?
DVC 4ohm...
bridge the amp to 1 channel and subs to 4 ohm or 2 ohm...
then get 3200watts @2ohm to 2 subs = 1600watts a sub...
or bridge subs at 4ohm and get 2000watts = 1000watts a sub...
now you tell me how i wont get full pottencial out of the amp!?
DVC 4ohm...
bridge the amp to 1 channel and subs to 4 ohm or 2 ohm...
then get 3200watts @2ohm to 2 subs = 1600watts a sub...
or bridge subs at 4ohm and get 2000watts = 1000watts a sub...
now you tell me how i wont get full pottencial out of the amp!?
you can get a 4 ohm load and then get 1000 watts to each speaker which would be fine. but that would not be using the amp to its full potencial.