New products from Image Dynamics
01-16-2007, 09:16 AM
#1
0 Watt CAFz'r
Thread Starter
Join Date: Dec 2004
Posts: 7
New products from Image Dynamics
XS Component speakers
The XS series components from Image Dynamics are the culmination of a engineering driven research and development project to produce sound performance that is without compromise. Powerful detailed and dynamic in musical their musical output they excel in the challenging automotive acoustic environment. XS component speaker systems provide superior resolution of details through the critical mid-bass / midrange and high frequencies with incredible dynamics and sonic realism. Available in 6.5” 5 x 7” and 6 x 9” models.
An innovative speaker system that allows multiple tweeter mounting options for the best in car performance and ease of installation.
The XS28 tweeter provides stunning clarity, dynamics, and detail without harshness or listening fatigue. Their very smooth frequency response, both on and off axis, allows them to excel in many different mounting locations. The XS28 tweeter are provided in performance tested matched pairs.
The XS mid-bass/midrange drivers are articulate, with dynamic impact and exceptional clarity. This is a result of high efficiency that the powerful neodymium motor structures and light composite cone produce. They reproduce the finest details of the midrange while reproducing the mid-bass range with intense dynamics and exceptional transient response. Their performance provides a true lifelike listening experience.
XS Series features
Woofer
-Composite multi layer ceramic fiber and Rohacell cones structure
-External ring Neodymium Magnet Motor Structure
-Nomex spiders with progressive roll design.
- Parabolic rubber surround reduces moving mass and increases cone area.
-Composite glass fiber non–resonant basket designed to eliminate reflective distortion
Tweeter
-28 mm hand coated soft silk dome
-Removable face plate and grill assembly
-Multiple mounting options, separate and coaxial.
- High grade neodymium motor structure
-Aluminum voice coil wire
-Mounting depth .85”
Crossover
-Metalized Polypropylene capacitors
-Low loss 16 gauge air core inductors
-different crossover alignments for different mounting configurations.
-Custom tooled case that worthy of highlight in your installation
SPECIFICATIONS
RMS POWER FREQUENCY MOUNTING
MODEL HANDLING IMPEDANCE SENS RESPONSE DEPTH
XS28 100 WATTS 4 OHMS 92 dB 900Hz to 25 Khz .85”
XS6 100 WATTS 4 OHMS 91 dB 55Hz to 25Khz 3.0”
XS57 150 WATTS 4 OHMS 91 dB 55Hz to 25Khz 2.7”
XS69 150 WATTS 4 OHMS 92 dB 45Hz to 25Khz 3.6”
iDQ V.3
The true balance of power and grace, able to reproduce very high output levels with incredible quality and accuracy. More than the sum of the parts the iDQ V.3 is an extreme evolution in iDQ subwoofer performance. With increased excursion, new suspension design, higher power handling they play lower and louder than ever before with even better sound quality, the true balance of power and grace.
The all new iDQ V.3 subwoofers redefine performance for small enclosure subwoofers. Articulate and detailed with proper tonal accuracy at even extreme volume levels. They provide the incredible dynamic impact necessary while attaining extreme low frequency extension from the smallest of enclosure sizes.
The famous sound off winning performance of the iDQ subwoofers has been further improved for 2007. Every part was engineered from the ground up, and is the result of substantial experience in subwoofer design. Motor structures were optimized for long linear excursion and low distortion performance using the latest finite element analysis software. The cone was engineered to increase stiffness while reducing mass. The new patent pending voice coil attachment was engineered to improve assembly efficiency while improving reliability and durability. Removable core assembly allows for painting of the basket or field service. The moving assembly including cone, surround, and voice coil were engineered to keep mass to a minimum so that a high compliance suspension could be used. This maximizes efficiency and output over the subwoofers entire frequency range.
The removable core assembly allows you to custom match the basket color to your installation. Another feature of the removable core assembly is if the subwoofer ever requires service it allows you to replace the whole moving assembly quickly and easily.
Features
Composite Basket- Cast composite glass reinforced baskets provides a very rigid high strength non resonant basket.
Rubber Surround- Parabolic surround roll profile provides long excursion without reducing piston diameter
Poly Mica Cone- Ultra rigid design mica reinforced polypropylene.
Voice Coil Attachment- the iDQ V.3 utilizes a patent pending design that interlocks the cone spider and voice coil together as an assembly.
.
Damper - Long life Nomex with integral flexible leads
Voice coil- High temp aluminum wire wound on black anodized aluminum former
Motor Structure- Motor structures for the iDQV.3 are highly refined using the latest in finite element analysis.
01-16-2007, 09:33 AM
#4
0 Watt CAFz'r
Thread Starter
Join Date: Dec 2004
Posts: 7
Originally Posted by zinger002
so by looking at the images you have provided you can either run the tweeter on the mid itself or externally mount it?
We call it the Chameleon this is a new version, you can run this as a midbass driver or as a set.
01-16-2007, 02:36 PM
#10
Originally Posted by Fishbone
And difference in box requirements for the IDQ v.3 vs. the v.2? Or can I just drop the new ones right in as a replacement?
Altough I don't expect a drastic change for an encl size. Like 3 cubes ported for a 12" lol.
