I found 2 faily new Old skool kicker XPL 10 " Subs.
Anyone have any info on these ? http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg |
If the model # is X10C-4 it was last produced in 1999 I believe. Cast aluminum frame, XMAX of 10.35mm, 350 watts power handling. http://thebassbin.co.uk/shop/product...ts_id/127.html Hope that helps a bit.
[ March 04, 2005, 01:40 AM: Message edited by: Jeepbeats ] |
that one is the 1997 version, it has a higher sensitivity than the newer ones.
it has a stamped steel basket. [img]graemlins/deal4u.gif[/img] |
LOUD BROWN KICKER IS RIGHT.
But what are the exact specs of it ? |
FS = 24 hertz
Qms = 10.21 Vas = 3.542 cu.ft Mms = 2.554 oz Xmax = 0.407 in Sd = 52.7 sq.in Qes = 0.529 Re = 3.1 ohms Le = 0.427 mH Z = 4 ohms BL = 1.796 lb/A Pe = 350 watts Qts = 0.503 1-W SPL = 86.7 dB [img]graemlins/thumb.gif[/img] [ March 04, 2005, 09:45 PM: Message edited by: SPL donut ... ] |
SO IS THAT GOOD ?
I just picked them up tonight.They are in mint shape almost new ! |
If it is the 1997 version, X10-4, here are the specs:
FS = 26.17hertz Qms = 7.729 Vas = 4.838 cu.ft Mms = 1.564 oz Xmax = 0.293 in Sd = 52.7 sq.in Qes = 0.458 Re = 3.11 ohms Le = 0.241 mH Z = 4 ohms BL = 1.581 lb/A Pe = 300 watts Qts = 0.432 1-W SPL = 89.58 dB Little bit different from the ones above^^^^ |
Those are awesome subs. I wish I had a couple still. The diffenence is a lot between the Specs I had and the specs Jeepbeats had. Best to find out the exact model, and go from there. Is there any coding on the back?
|
Rob what you have are a pair of Kicker XPL-KX10.4
As Loud stated they are from the '96-97 era and are quite different than the newer style XPL's (X10c) which had a slightly higher power handling rating (350rms), lower sensitivity (88.5dB), and different cone material. Yours are rated at 300rms and have a sensitivity number just shy of 90dB. Personally I never got a chance to audition the first gen. XPL's but I did try out the second gen's and I thought they were a great driver. Handled a good amount of power, worked in many smaller enclosures and sounded excellent. A bit expensive for what you were getting I thought but a good performer still. |
Well I paid $100 for both. Now I got make a sealed enclosure for them.
|
All times are GMT -5. The time now is 03:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands