Car Audio Forumz - The #1 Car Audio Forum

Car Audio Forumz - The #1 Car Audio Forum (https://www.caraudioforumz.com/)
-   General Discussion (https://www.caraudioforumz.com/general-discussion-10/)
-   -   Problem with AUX input (https://www.caraudioforumz.com/general-discussion-10/problem-aux-input-75464/)

patman_h 06-04-2008 07:03 PM

Problem with AUX input
 
hey guys, quick question

the aux input on my deck seems to be significantly quieter than cd or radio. the volume on my ipod is maxed, connections are nice a tight, there is no volume limiter within the deck itself.

could it be because i used a rca to mini adapter? i am stumped on this one..

Greg_Canada 06-04-2008 07:34 PM

What deck?

danyman 06-04-2008 07:41 PM

ya cause i found out on my clarion deck that you can up the incoming volume ( until is stopped working lmao)

patman_h 06-04-2008 08:15 PM

sorry i have a Panasonic cq-c9700u deck

i am not aware of some kind of input volume control with my deck

danyman 06-04-2008 08:16 PM

check the manual you never know thats where i found that out for mine

patman_h 06-04-2008 08:31 PM

yeah i just took a good read through the manual.. nothing about a volume control for aux in..

any other ideas?

danyman 06-04-2008 08:34 PM

not that im aware of sorry

veeman 06-04-2008 10:28 PM

the rca to mini has nothing to do with that, unless the cable itself, or the aux input is defective. Rca to mini, gives an excellent signal if everything is in good order. Are the headphones working properly? If so, then the ipod is fine. Try another cable, or try the ipod and cable to another mini input device to rule out the cable. If it's good with another device, then the problem is with the deck, either the jacks, the circuitry, or it's just a muted input that does not deliver the same amount of gain as the internal sources.

grep 06-05-2008 07:26 AM

Make sure you are using the aux-in jacks and not the pre-out jacks.

4boyssss 06-05-2008 07:46 AM

ipod
 
I would check the specs of your cable coz some uses mono instead of stereo type connector which is half the input signal of what you're deck is getting.


All times are GMT -5. The time now is 05:38 AM.


© 2024 MH Sub I, LLC dba Internet Brands