Anybody have any plans or suggestions on building a sub box for underneath the back seat of a 98 Ram QC.I was hoping to put 2 10's in.
|
Welcome to the board! Here are a couple of expensive options for you: http://www.jlaudio.com/stealthbox/ramextendedcab.html
http://www.jlaudio.com/stealthbox/ramctr2.html Could always talk to a shop about getting a fiberglass one done up, also. Hope this helps! |
^^^ditto
|
ok here's what I did in my 99 quad cab
http://memimage.cardomain.com/member...22_43_full.jpg http://memimage.cardomain.com/member...22_41_full.jpg http://memimage.cardomain.com/member...22_44_full.jpg I had to use 4" seat risers like these http://memimage.cardomain.com/member...12_44_full.jpg here's the box plans i started with , but I modified mine, I made the boxes narowwer to have smaller chamners for the 8" woofers and a larger amp rack http://memimage.cardomain.com/member...12_42_full.jpg http://memimage.cardomain.com/member...12_43_full.jpg I got the box plans from this nice guy here my page is here I was also able to fit a small 12" x 12" x 6" sealed box under each front seat too (that's what I had the x-max 8's in before I built the ported bx |
oh yeah I was also able to fit a kicker ks80 substaion on the hump for a while
http://memimage.cardomain.com/member...22_30_full.jpg or there is this q-logic box for a single 12 http://www.cardomain.com/item/QLCQLC1DTX11235 and this mtx box for 2 10's I do believe you can just buy the box and add your own 10's if you like http://www.mtxaudio.com/caraudio/pro...res/DRXP20.cfm [ June 23, 2004, 09:07 AM: Message edited by: dodgeram ] |
^wow...great post!
|
Thanks Dodgeram,that helps a lot.
|
Originally posted by Orion_95: ^wow...great post! |
x 10
|
Hey dodgeram,how did you make the bottom of your box.That is definitely the hardesr part.How did you deal with the tranny tunnel and the slope of the floor.Did you use fiberglass or MDF?
|
All times are GMT -5. The time now is 10:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands