Remote control wire question, please help:)
 

Hi, I have a blue and white wire with a label that say remote control wire in the back of my Pioneer head unit.

I have a RCA wire with a remote control wire, but it's not 2 wires like the remote control wire that is comming from out of my head unit. But I think the blue and white wire..are torsaded togheter... is it okay if a solder my rca that has 1 wire for the remote control wire with the 2 wires coming from the head unit?

In less words, my wire for remote control is 2 wire. And the wire that is with my RCA wires is only 1. Does is matter? Because I think the 2 wires blue and white.. are joining togheter on the little piece of metal.. that I can solder my RCA remote control wire on..

Please tell me if this is okay?

Thanks,

Please, be gentle! Help a noob

Solder it to one or the other and you'll be fine.

Greatly apreciated :) thanks

The Pioneer deck should have a single blue/white wire coming out of it labelled Remote Control. Connect this wire to the remote-on wire for your amp.

If you have a power antenna, it is connected to this wire as well.

[QUOTE=Dukk;318499]The Pioneer deck should have a single blue/white wire coming out of it labelled Remote Control.QUOTE]


Yea this is what I have, but I tought the blue/white where seperated...So now I know they are one wire.... thanks alot