I'm just wondering if using fiberglass sandwich panels would work with a sub box... (fiberglass, foam, fiberglass)... because this would give the box the rigidity but not the weight of mdf... anyone see any other pros/cons of this. I know how to make the panels, and have the skills to do it, but i don't want to waste my time and find out that its going to sound like crap. anyone know if its been tryed and how it sounded?
|
why not just fiberglass?
|
Fiberglass isn't very stong on flat surfaces. Unless this is for a custom enclosure (i.e. wheelwell, spare tire well...) I wouldn't recommend it...
|
i've used honeycomb carbon fibre.unfortunately the angles inside to box caused cancellation above 44 hz..it made absurd air movement @ 42-43hz though(i could slip my hand between the body of the car & the hatch).the box is on this thread in the iasca finals pics [img]graemlins/headbang.gif[/img]
stick to a rectangular box and give'er '$hit! :cool: |
mmartin1872 - yes it will work just fine. I first suggested his to the readership of TermPro back in 1997 and a few experimented with it with good results.
Fibreglass resin eats some types of foam so test first before hand. |
so the density of the sandwich panel wouldn't have an adverse effect to the final sound of the subs? i was always under the impression that the mdf was good because it was rigid and dense... am i wrong about this? sorry for asking all the questions guys
|
The composite enclosure would be plenty rigid but the box itself would ahve a higher resonant freq than an mdf one (due to mass). Foam is pretty lossy though so I doubt it would be an issue.
|
All times are GMT -5. The time now is 06:02 AM. |
© 2024 MH Sub I, LLC dba Internet Brands