Subs to match my Ultimate T3-500D?
I just grabbed a box w/ 2 10"'s and an amp from someone in my car club.
The amp is an Ultimate T3-500D, and the subs are Pioneer TS-256C's. From what I've been reading about this amp it's massively overpowered for these subs. If I want to stick to a pair of 10's what would be the best Subs to match up with this amp? |
Ultimate T3-500D Amp specs
12.5Volts RMS Output 500x1@4OHMS @ 53Amps 1000x1@2OHMS @ 100Amps 13.8Volts RMS Output 500x1@4OHMS @ 45Amps 1000x1@2OHMS @92Amps *Specs. According to Manufacturer* what ohms are the subs? |
The current Sub Specs are
Specifications Watts MAX. Music Power 700 Watts Watts Nominal Power Handling 350 Watts Frequency Response 18hz ~ 2.5kHz Sensitivity 87dB Ohm Rating 4 As for the Amp, I was looking at this posted by someone on another forum. I just got finished doing extensive tests on both the T3-1000d and the T3-500d. The T3-1000d is two 500's in one case. A pair of 500's bridged will do 1 ohm. A 1000 will not do 1.5ohm or below. power at 11.8v T3-500x4ohm=500w T3-1000x4ohm=1000w T3-500x2ohm=900w T3-1000x2ohm=1800w T3-500x1ohm=1575w T3-1000x1ohm=3150w but goes into protection 2 bridged T3-500's into 1ohm=3150w |
All times are GMT -5. The time now is 05:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands