System updates
So I got the mid/tweet kicks wrapped in carpet and this will be there approximate position (and yes, I will make a nice baffle trim and all that to pretty it up):
You can see here where the factory plastic kick panel that has an oblong fresh air vent hole is located, behind and above the mid/tweet kick pod I made:
After looking into various options, I decided my 7" midbass will be going into the factory vent location. Here is a pic of the panel with the vent flapper door and **** removed:
Here is a shot test fitting it in the hole, along with the baffle ring. The final location ended up being higher up in the hole, because the mid/tweet kick overlaps onto the factory kick panel plastic.
And another. It fits in there with enough room for me to make a small panel with an aperiodic-mat to go behind the midbass to AP-load it into the kick panel cavity of the truck.
I would show pics of it with the supports in place but I don't have current ones of those yet.
And here is a shot of the amp rack coming along:
You can see here where the factory plastic kick panel that has an oblong fresh air vent hole is located, behind and above the mid/tweet kick pod I made:
After looking into various options, I decided my 7" midbass will be going into the factory vent location. Here is a pic of the panel with the vent flapper door and **** removed:
Here is a shot test fitting it in the hole, along with the baffle ring. The final location ended up being higher up in the hole, because the mid/tweet kick overlaps onto the factory kick panel plastic.
And another. It fits in there with enough room for me to make a small panel with an aperiodic-mat to go behind the midbass to AP-load it into the kick panel cavity of the truck.
I would show pics of it with the supports in place but I don't have current ones of those yet.
And here is a shot of the amp rack coming along:
I have a few shots of the interior and engine as well here:
http://www.sounddomain.com/memberpage/307882/6
In the next system build-up I do, the kicks will be all 1 piece with the midbass where they are now, and the 4/tweet flushed into the kick cavity so they will hardly stick out at all. This is just a simple first system to get some sound in.
http://www.sounddomain.com/memberpage/307882/6
In the next system build-up I do, the kicks will be all 1 piece with the midbass where they are now, and the 4/tweet flushed into the kick cavity so they will hardly stick out at all. This is just a simple first system to get some sound in.
Looks great man, what kind of mids are those? AVI?Gonna use the Power 300 in this install? Hook me up with one of your old BBQ's, I need one.... 
[ August 13, 2004, 06:58 PM: Message edited by: JeepBeats ]
[ August 13, 2004, 06:58 PM: Message edited by: JeepBeats ]
Guest
Posts: n/a
It's a Dynaudio.
Or was it Seas?
Maybe a Lanzar?
Or RatShak?
TangBand?
meh - personally I don't care what's on the label as long as they sound good. I have a stash of 1" soft dome tweeters with neo magnets on them. I honestly have NO idea what brand they are but they sound alright, and that is good enuf for me [img]smile.gif[/img]
Or was it Seas?
Maybe a Lanzar?
Or RatShak?
TangBand?
meh - personally I don't care what's on the label as long as they sound good. I have a stash of 1" soft dome tweeters with neo magnets on them. I honestly have NO idea what brand they are but they sound alright, and that is good enuf for me [img]smile.gif[/img]
