session606

So my current sound system consist of a pioneer deck with some hack job wiring that im currently trying to fix up right with a stock harness (for a dodge truck) 1 clarion apx400.4 amp that powers 4 door speakers (stock) and 1 panasonic 600 watt amp (i forget the model) and two clarion SRM-3004 12" subs. The problem that i am having is ive taken the subs out temp. to build a new box, but now i have no music coming out of my door speakers only clicking noise when i turn the deck up. I didn't mess with any of the wiring so i dont under stand why its not working now. Does anyone have any insight into my problem

Also does anyone have an info on clarion SRM-3004 subs, i know they need to be ported but im un-sure of the box sizing.

thanks in advance

zzzzzzz

iTrader: (5)

start with the wiring (fix the hack job and look at fuses)

session606

yes will do. its a 15amp fuse that i will check tomorrow and also i have a RC to head phone jack converter that im going to use to rule out some further possible issues that i might have with the deck. ill check back in tomorrow afternoon with some details

session606

so i got some time today to check out some things. the deck turns on and works right, but still doesn't play music it only makes clicking noises when i turn the volume up. i replaced all fuses in the system and checked to make sure the amp was working by hooking up a RC to Headphone jack converter and it played. ok so im thinking that i might need a new deck because thats the last think on the list.

also does anyone have info on clarion SRM3004 subs, i need it so i can finish my new boxes

jalat

iTrader: (6)

general rule of thumb is that two 12"s require 3.75-4.5 cubes feet ported (after displacments)

session606

im looking to split the boxes so would i half the port size and cubic feet? also do you have any ideas as to whats wrong with my head unit. im going to truck and wire a sony one in tomorrow to see if it it my deck. i cant wait for some nicer weather so i can finish my truck up

caron

you have no idea how much ive been waiting for some nice weather btw wat size is your cab??? single, extended??? pics as well???

session606

2002 regular cab short box 1500. ill post some pictures later

session606

so i was able to get a new deck inplace of my old one and it does work, but i now have a slight clicking noise while on acc. and then a low pitched hum while its runningthe truck, but the hum increases when i increase the rpm. im thinking now i should clean the terminals on the battery and find the system ground and clean it up. also who owned it before ran both rca cables down the same side as the power wire, would this have something to do with it. i think im going to have a very fun weekend

420guy

iTrader: (5)

Clean up all your ground points to shiny bare metal. Run the RCAs down the opposite side from the power wires. Clean the battery terminals. That should take care of it. Let us know if there are still issues after that.
HTH
Nick