Hello everyone I have six Eminence Lab 12 to my disposal. I am only going to use four and the Other two can be spares. Now you are probably wondering why I am using a Pro Audio Driver. Well from experience I know these get low and pretty loud. I am not looking to win trophies right now just a little boom boom. I am going to be doing a build in my Mazda b2600i Which is my daily POS till next spring. I was just wondering what you guys thought about these sub good and bad feedback is welcome. I also will be using Russian Birch 3/4 Ply for construction.


Here is a link to the woofer. I get these subs for free in the box and recone kits as well. LAB12

SPECIFICATION
Nominal Basket Diameter 12", 304.8mm
Nominal Impedance* 6 ohms
Power Rating**
Watts 400W
Music Program 800W
Resonance 22Hz
Usable Frequency Range 25Hz - 0.12kHz
Sensitivity*** 89.2dB
Magnet Weight 160 oz.
Gap Height 0.37", 9.53mm
Voice Coil Diameter 2.5", 63.5mm
THIELE & SMALL PARAMETERS
Resonant Frequency (fs) 22Hz
DC Resistance (Re) 4.29
Coil Inductance (Le) 1.48mH
Mechanical Q (Qms) 13.32
Electromagnetic Q (Qes) 0.39
Total Q (Qts) 0.38
Compliance Equivalent Volume (Vas) 125.2 liters / 4.42 cu.ft.
Peak Diaphragm Displacement Volume (Vd) 659cc
Mechanical Compliance of Suspension (Cms) 0.35mm/N
BL Product (BL) 15 T-M
Diaphragm Mass Inc. Airload (MMs) 146 grams
Efficiency Bandwidth Product (EBP) 56
Maximum Linear Excursion (Xmax) 13mm
Surface Area of Cone (Sd) 506.7 cm2
Maximum Mechanical Limit (Xlim) 22mm

MOUNTING INFORMATION
Recommended Enclosure Volume
Sealed 22.7-28.3 liters / 0.8-1 cu.ft.
Vented 45.3-101.9 liters / 1.6-3.6 cu.ft.
Driver Volume Displaced 188.6 cu.in. / 3.09 liters
Overall Diameter 12.32", 312.8mm
Baffle Hole Diameter 10.98", 278.9mm
Front Sealing Gasket Fitted as standard
Rear Sealing Gasket N/A
Mounting Holes Diameter 0.26", 6.6mm
Mounting Holes B.C.D. 11.77", 299mm
Depth 6.44", 164mm
Net Weight 22 lbs, 10 kg
Shipping Weight 23.8 lbs, 10.8 kgs

MATERIALS OF CONSTRUCTION
Coil Construction Copper voice coil
Coil Former Polyimide former
Magnet Composition Double stacked 80 oz. ferrite magnets
Core Details Vented and extended core

Basket Materials 12-spoke die-cast aluminum basket
Cone Composition Kevlar-reinforced paper cone
Cone Edge Composition Foam cone edge
Dust Cap Composition Dual inverted dust caps