Viper 1200.1 or RF BD1000a1
10-11-2005, 03:51 PM
#1
I will be buying one of these two amps and running it at 2ohms to a single 16Ov2 in a ported enclosure tuned to about 34hz.
Due to my weak alternator, full tilt is usually 12.5-13.5v at full tilt.
Both cost about the same.
(I dont plan on burping below 2ohms or anything like that... and I dont really see myself having to upgrade in the near future, or having to strap amps) The subsonic filter on the viper is nice, but isnt totally necessary.
Which should I get? Convince me. [img]smile.gif[/img]
[ October 11, 2005, 04:52 PM: Message edited by: mik ]
Due to my weak alternator, full tilt is usually 12.5-13.5v at full tilt.
Both cost about the same.
(I dont plan on burping below 2ohms or anything like that... and I dont really see myself having to upgrade in the near future, or having to strap amps) The subsonic filter on the viper is nice, but isnt totally necessary.
Which should I get? Convince me. [img]smile.gif[/img]
[ October 11, 2005, 04:52 PM: Message edited by: mik ]
10-11-2005, 04:06 PM
#3
I have upgraded the big three so no worries there.
I have a thread on ICIX too, rockford seems to be winning there. I dont have experience with DEI/Viper/Orion, or Rockford so I have to go with what people say.
The thing that concerns me most is the quite large power difference of the two amps at 2ohms. I belive its 775wrms (Rated for the Viper) vs an actual 1100 or so for the Rockford at 14v (and still around 900wrms at 12.5v).
[ October 11, 2005, 05:07 PM: Message edited by: mik ]
I have a thread on ICIX too, rockford seems to be winning there. I dont have experience with DEI/Viper/Orion, or Rockford so I have to go with what people say.
The thing that concerns me most is the quite large power difference of the two amps at 2ohms. I belive its 775wrms (Rated for the Viper) vs an actual 1100 or so for the Rockford at 14v (and still around 900wrms at 12.5v).
[ October 11, 2005, 05:07 PM: Message edited by: mik ]
10-11-2005, 05:06 PM
#4
wagonized, that's a pretty bold statement. why is it a better amp? better quality parts? more reliable? more efficient (given this seems to be a criteria)?, better features?, size? better SQ?
give up some of that knowledge.
mik are both these amps new or used?
give up some of that knowledge.
mik are both these amps new or used?
10-11-2005, 05:09 PM
#5
The rockford is used and the viper is new, but ive had much more communication with the seller of the RF in the past.
The only things the viper seems to have over the RF is the following (Strappable - I dont care, Subsonic filter - not necesary if youre careful and have a low tuned box.. been there done that, the fact that it has built in fuses - big deal, and that its new).
Neither of them would have warranty anyways I would assume.
The RF is a smaller footprint, more power for the load im going to be running, and the efficiency of both is about the same. I guess I've more or less answered my own question, unless someone can provide a better arugment why the Viper would be a better choice (and possibly a benchtest?).
[ October 11, 2005, 06:15 PM: Message edited by: mik ]
The only things the viper seems to have over the RF is the following (Strappable - I dont care, Subsonic filter - not necesary if youre careful and have a low tuned box.. been there done that, the fact that it has built in fuses - big deal, and that its new).
Neither of them would have warranty anyways I would assume.
The RF is a smaller footprint, more power for the load im going to be running, and the efficiency of both is about the same. I guess I've more or less answered my own question, unless someone can provide a better arugment why the Viper would be a better choice (and possibly a benchtest?).
[ October 11, 2005, 06:15 PM: Message edited by: mik ]
10-11-2005, 06:51 PM
#6
Guest
Posts: n/a
Originally posted by Mr. Marco:
wagonized, that's a pretty bold statement. why is it a better amp? better quality parts? more reliable? more efficient (given this seems to be a criteria)?, better features?, size? better SQ?
give up some of that knowledge.
mik are both these amps new or used?
wagonized, that's a pretty bold statement. why is it a better amp? better quality parts? more reliable? more efficient (given this seems to be a criteria)?, better features?, size? better SQ?
give up some of that knowledge.
mik are both these amps new or used?
You can count on a good 1250-1300 wrms @ 1ohm from the viper amp.
10-11-2005, 06:57 PM
#7
Originally posted by Wagonized:
</font><blockquote>quote:</font><hr />Originally posted by Mr. Marco:
wagonized, that's a pretty bold statement. why is it a better amp? better quality parts? more reliable? more efficient (given this seems to be a criteria)?, better features?, size? better SQ?
give up some of that knowledge.
mik are both these amps new or used?
</font><blockquote>quote:</font><hr />Originally posted by Mr. Marco:
wagonized, that's a pretty bold statement. why is it a better amp? better quality parts? more reliable? more efficient (given this seems to be a criteria)?, better features?, size? better SQ?
give up some of that knowledge.
mik are both these amps new or used?
You can count on a good 1250-1300 wrms @ 1ohm from the viper amp. </font>[/QUOTE]Is NOT being run at 1ohm. Thats the difference.
10-12-2005, 05:38 PM
#9
Guest
Posts: n/a
Originally posted by mik:
</font><blockquote>quote:</font><hr />Originally posted by Wagonized:
</font><blockquote>quote:</font><hr />Originally posted by Mr. Marco:
wagonized, that's a pretty bold statement. why is it a better amp? better quality parts? more reliable? more efficient (given this seems to be a criteria)?, better features?, size? better SQ?
give up some of that knowledge.
mik are both these amps new or used?
</font><blockquote>quote:</font><hr />Originally posted by Wagonized:
</font><blockquote>quote:</font><hr />Originally posted by Mr. Marco:
wagonized, that's a pretty bold statement. why is it a better amp? better quality parts? more reliable? more efficient (given this seems to be a criteria)?, better features?, size? better SQ?
give up some of that knowledge.
mik are both these amps new or used?
You can count on a good 1250-1300 wrms @ 1ohm from the viper amp. </font>[/QUOTE]Is NOT being run at 1ohm. Thats the difference. </font>[/QUOTE]car audio is an addictive game...im sure eventually he'll want to upgrade or just wire it to 1 ohm and double his power
Originally posted by Prolifik:
they are both equaly good. viper amp will not put out its rated power.
they are both equaly good. viper amp will not put out its rated power.
Also the viper 2500d, and corresponding DEI, orion, memphis amps are just two 1200d boards linked together and have been known to put out 2700 watts @ 2 ohms right out of the box. And then can also run at 1 ohm daily and slightly below for burps meaning the 1200d may even be0.5 ohm stable although ive never heard tests of the sort
10-12-2005, 08:45 PM
#10
500 Watt CAFz'r
Join Date: Feb 2005
Posts: 603
Originally posted by Wagonized:
Also the viper 2500d, and corresponding DEI, orion, memphis amps are just two 1200d boards linked together and have been known to put out 2700 watts @ 2 ohms right out of the box. And then can also run at 1 ohm daily and slightly below for burps meaning the 1200d may even be0.5 ohm stable although ive never heard tests of the sort
Also the viper 2500d, and corresponding DEI, orion, memphis amps are just two 1200d boards linked together and have been known to put out 2700 watts @ 2 ohms right out of the box. And then can also run at 1 ohm daily and slightly below for burps meaning the 1200d may even be0.5 ohm stable although ive never heard tests of the sort
