What am I SQ or SPL?
I was thinking about it the other day,dont know what i really am anymore?
|
Whenever I think of SPL I think of dB competition. I think of big ugly boxes that get the job done at a choosen frequency. I think you would qualify as SQL, a mix of both, which is what I think most people really want when they say SPL. Just my $.02
|
Asking on an internet forum "What am I?" is a very loaded question. :smilie_au
|
Dont worry i was thinking about that when i posted it...... already thought of it... Very Bold..
|
Don't worry, it's fun to SQooL all these SQ'ers and SPL'ers ;)
Welcome to the club! :smokin: |
Originally Posted by twistedsickness
I was thinking about it the other day,dont know what i really am anymore?
- see what db you obtain with a burp. - put in a Iasca SQ disc and see how it.. stage, image, sound tonally and if it realistic or not, etc. The one that does better is your answer...... ;) |
You're neither... don't have the proper setup/equipment to be competitive in either arena at a serious level.
So.... you're a ground pounder.... nothing wrong with that. :smilie_da |
if i wanted to be competitive what the hell do i have to do?????? i dont know what im missing List it!! ill buy it muahahhhahaa
|
I'd say that before you buy anything else... you need to decide what it is you want to do.
Trying to do both will usually end up in not being successful with either... (and before anyone says it... yes, I know Fukuda did it a long time ago, but things have changed since then!) |
i want all sounds just loud and clear not distorted
|
Then you need to basically throw out the game plan you have now and start from scratch. A good system is one that is matched together properly for a dedicated task. It is not one that is just thrown together (with what was it 30 pairs of 6.5" coax's?)for whatever the reason may be. You might have the best gear in the world, however, if it is poorly matched together for their abilities, it is completely worthless.
So far from our conversations that we have had and your posts here on the forum, you have been going 100% backwards and just now have realized it so it seems. You may now have spent a whole crapload of loot on all the wrong gear. Figure out the game plan for what you want. Then a proper system layout can be designed. Will you keep your business in Canada and see the value that a good dealer here can offer?, well, that is up to you. So far your dealing out of the US seems to have gotten you not too far except for a nasty case of bad sound. |
No has made me a offer to keep me from Jumping all the time So what if your point of view i need to do?
|
You need to come up with a game plan. Otherwise, you lose every time. Lay out the goals for what you want. Good sound, obnoxiously loud, modifications to the vehicle etc. What you plan on doing, what you plan on having done. A cd based system or dvd based system. A budget is important. What level of service you expect from a dealer. Right now and from day 1 you have lacked a game plan, that is the very first thing you need to do if you want to be competitive.
|
well i did say what i wanted.
what else do you need from me? |
EGA 700.2 - start eliminating amplifiers, too many
EGA 680.4 PCA Class D 3500.1 Tarantula 960.4 Tarantula 6.5 x18speakers 120RMS - see you later, (18 pairs, WTF?) Tarantula 6x9s speakers 150RMS - hit the road, bye bye Tarantula T4 Subs. X2 900 RMS 1Ohm - can a proper box fit in your car for 4? Van Gogh 6.5 Components 150RMS - might be able to be salvaged SC40 Farad Capacitor - no need for this at all 170AMP Alternator (custom made). - a must have 140 sq Ft BrownBread. - good score and necessary Alpine 9855 - will do the job, I prefer Eclipse You need to get rid of a lot of the clutter in the system. Way too many speakers and too many amplifiers. Can a proper box fit into the trunk of your car limitations of what you have and how it will fit into the vehicle. Bigger does not mean better, more does not mean better. All that bottom end means that you must pay more attention to the front end. This is where good, really good speakers installed properly come into play. Installation is what is going to make or break the system as it lays right now or whatever changes are made to it. Map out a new plan of attack on the vehicle. |
Here's what I would recommend a customer like you...
2 pair of good 6.5 component in the front 1 pair of good 6.5 component in the back Subs, depending on vehicle, music type, but 2x15s or 4x10 or something like that amplify each channel, get a decent deck (looks like you have one) |
Ok let me clear up my gear....
EGA 700.2 dont know if im going to use it? EGA 680.4 dont know if im going to use it? PCA Class D 3500.1 Tarantula 960.4 Tarantula 6.5 x 18speakers 120RMS So far i made a Fiberglass encloseure for my trunk lid for outside partys and Kicks panels and soon to put 3 speakers on each door panel (Only 2 panels..) Tarantula 6x9s speakers 150RMS Replaced stock Tarantula T4 Subs. X2 900 RMS 1Ohm ok There only 2 subs not 4 "T4" is the model. Tuned at 28hz Van Gogh 6.5 Components 150RMS SC40 Farad Capacitor Looks Pretty and Nothing wrong going that big 170AMP Alternator (custom made). 140 sq Ft BrownBread. WORTH IT!! Alpine 9855 replacing it to something differnet dont know what i was considering the Pioneer AVIC Z1 (But sold it) Kenwood DDX6019 with NAV i havent found anything else that i want or consider on that matter |
how do you like the pca3500d?? ever had it blow up on you?
|
zomwtfg!!!!
18 pairs of seperates? Is this a demo vehicle? But seriously: Keep the cap/alternator/sounddeadening Tarantula 960.4 to run front stage One set, but if you must, 2 sets of components up front, please not 3-18, you make baby jesus cry. 6x9's in the rear, again only if you must. PCA Class D 3500.1 to run the two Tarantula subs If you have to have speakers in the trunk lid I would build a switching network so either the interior or trunk speakers will be on, not both. So, ditch about 16 pairs of the mids, both the EGA amps, preferably the 6x9 and 2 more sets of mids, and see how that is. Really, when it comes to drivers, less is more. I'm doing 9 drivers total in my car and I'd prefer to get that down to about 5 ideally. Really, 2 drivers would be the perfect solution, full range right and left. |
IM having a quick release or something along those lines. for the lid.
|
sq = install #1
think about your set up then mat the car with deader then start with a good #1 alt then #2a good battery #3 caps on the battery so you can not hit the + #4 0g wire with an fuse under 18" form the battery #5 0gto a block so you can get 4g out fuse with in 18" of the block 4g wire to amps then run your speaker wire to the speakers think and play with the speaker spot your wires need to be fastend no more then 6" apart thew out the car |
Kinda freaky what you just said :P your not missing one thing i havent done.
|
Originally Posted by twistedsickness
i want all sounds just loud and clear not distorted
it could be a matter of changing your port lenght if you are using areo ports get an extra pair with longer pipe or make a sleeve for your sloted to change the tuning .have fun with it . |
my box is tuned at 28hz 3" port x2 for each sub.
|
All times are GMT -5. The time now is 01:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands