Car Audio Forumz - The #1 Car Audio Forum

Car Audio Forumz - The #1 Car Audio Forum (https://www.caraudioforumz.com/)
-   General Discussion (https://www.caraudioforumz.com/general-discussion-10/)
-   -   wiring help needed (https://www.caraudioforumz.com/general-discussion-10/wiring-help-needed-30505/)

Denich 09-29-2007 04:42 PM

wiring help needed
 
trying to wire up my deck, a couple of questions

1. on the harness there is one yellow wire, but on the deck there is a memory lead wire with a 15A fuse and a bus power lead with a 3a wire both are yellow so do i connect both of them to the single yellow wire from the harness?

smpl_gy 09-30-2007 11:14 AM

Firstly,
1. What deck it is ?
2. What car is it?
3. What harness are you using (if any)?

cav2nv420 09-30-2007 12:05 PM

if you have two yellows and one is thicker with a bigger fuse you must run that straight to the battery

Denich 10-01-2007 12:34 AM


Originally Posted by smpl_gy (Post 279117)
Firstly,
1. What deck it is ?
2. What car is it?
3. What harness are you using (if any)?


1. clarion dxz775usb
2. 2004 lancer
3. a wiring harness from best buy i think its made by stinger

i ended up connecting them to the single yellow, but i think i might rewire it in a couple of weeks when i run the power cable for the amp (getting through the firewall is a huge PITA apparently)

cav2nv420 10-01-2007 07:46 AM

ask killer_klown187 on here about that also, he has a lancer and you think getting through the firewall is bad? lol He has like 4 or 6 runs of 0awg through there so you should talk to him about your dilema:smilie_da good luck

Riddle_Rob 10-01-2007 08:24 AM

Yea it took us forever to find a hole for a run of wire the day he got the car. We ended up finding one tho.

Denich 10-01-2007 12:30 PM


Originally Posted by Riddle_Rob (Post 279233)
Yea it took us forever to find a hole for a run of wire the day he got the car. We ended up finding one tho.

i know there is a spot wherte you run the wire through the fender, or one right behind the glovebox..... thats about it and i really dont want to drill any holes


All times are GMT -5. The time now is 01:17 PM.


© 2024 MH Sub I, LLC dba Internet Brands