Pioneer Premier Ts-w3001d2 12"
#1
Pioneer Premier Ts-w3001d2 12"
has any one herd this sub play "Pioneer Premier champion-level SPL" i want to get one but was wondering if it pounds these are the stats
12-inch Woofer
Voice Coil: Dual 2-Ohm
Peak Power: 3000 Watts
RMS Power Handling: 1000 Watts
Frequency Response: 20Hz ~ 150Hz
Sensitivity (Efficiency): 92 dB
Voice Coil Diameter: 2-1/2
Magnet Weight 110 oz
Recommended Enclosure Size: 0.5 ~ 1 cu. Ft.
its a good 27 pound subs
jus wondering if its a good sub n if its worth my 200 for the sub thanks
12-inch Woofer
Voice Coil: Dual 2-Ohm
Peak Power: 3000 Watts
RMS Power Handling: 1000 Watts
Frequency Response: 20Hz ~ 150Hz
Sensitivity (Efficiency): 92 dB
Voice Coil Diameter: 2-1/2
Magnet Weight 110 oz
Recommended Enclosure Size: 0.5 ~ 1 cu. Ft.
its a good 27 pound subs
jus wondering if its a good sub n if its worth my 200 for the sub thanks
#2
I had last years model and it was a very good sub, handled 1800 watts per coil on music, and never had a problem. The new ones have different coils in them, so i dont know how well they sound. There is a member on here (masterstone) who has 2 of them you could ask him.
#3
that seems like alot of sub for $200 thats for sure i dont have any experience with them but if they can hold up like the one ridinspinners had (yeah im h4x00r h3ll) then i think for 200 it would be hard to beat
#6
Like i said ealier i played 1800 watts per coil on musc not burping and it had not problem. Never over heating, smelling or sounding like crap over time. they are a great sub and have not changed much other then the coil material and design in basket. Which in some cases can be alot but not if its a 200 dollar sub.
#8
everything about that is a load of crap..... you daily drive an spl sub the last thing you need to worry about is over heating....
#9
i got one of em i'm planing on getting two but i'll need the power to push it... i was wondering if power acoustik amps are good and reliable in the sense it wont burn out like in a year and a half and it wont over heat... i was thinking about the "POWER ACOUSTIK OV1-4000D"
Hi Speed Digital Circuitry
Fully Regulated PWM Power Supply
Four Way Protection Circuit
1 Ohm Stable
Bridging Synchronization
Variable Low Pass 50Hz-150Hz
Variable Subsonic Filter 15Hz-40hz
Variable Subwoofer EQ @ 45Hz
Phase Switch 0-180
Remote Dash Mount Low Level Gain Control With Cable
Frequency Response: 15Hz to 150hz
S/N Ratio: 100 db
THD: 0.5%
System Distress Indicator
Inputs Sensitivity: 200mv-8v
Dual Mono Speaker Output Connectors
Platinum Plated Heavy Duty Power & Speaker Terminals
Dimensions : 11.25" x 2.3" x 11.7"
Specifications
Peak Power : 4000 W
Rated Power :
1200 W x 1 CH @ 4 Ohms
1700 W x 1 CH @ 2 Ohms
2200 W x 1 CH @ 1 Ohms
i want to go with a hifonics amp but those things... the price are like wow.... too much for me lol so i was just wondeirng about this amp thanks for all the feedback guys i seen a single one of these subs in action on you tube and one seem to do the work 2 of my punch 2 did
Hi Speed Digital Circuitry
Fully Regulated PWM Power Supply
Four Way Protection Circuit
1 Ohm Stable
Bridging Synchronization
Variable Low Pass 50Hz-150Hz
Variable Subsonic Filter 15Hz-40hz
Variable Subwoofer EQ @ 45Hz
Phase Switch 0-180
Remote Dash Mount Low Level Gain Control With Cable
Frequency Response: 15Hz to 150hz
S/N Ratio: 100 db
THD: 0.5%
System Distress Indicator
Inputs Sensitivity: 200mv-8v
Dual Mono Speaker Output Connectors
Platinum Plated Heavy Duty Power & Speaker Terminals
Dimensions : 11.25" x 2.3" x 11.7"
Specifications
Peak Power : 4000 W
Rated Power :
1200 W x 1 CH @ 4 Ohms
1700 W x 1 CH @ 2 Ohms
2200 W x 1 CH @ 1 Ohms
i want to go with a hifonics amp but those things... the price are like wow.... too much for me lol so i was just wondeirng about this amp thanks for all the feedback guys i seen a single one of these subs in action on you tube and one seem to do the work 2 of my punch 2 did
#10
i had 2 of the 3001d4's powered by the hifonics 2006d brutus amp and they pounded good, solid sub i was just a retard and set my gains wrong and clipped both of them. They were running 1000 watts a piece @ 1 ohm and were great.