HI guys, I was wondering if anybody has any aftermarket crossover modules for the ZR amp series. I know there are lots of different ones just for crossover purposes only, but there are also a few for controlling the subwoofer. Like theres one for handling freeair subs, and others like that. What are the different sub control ones are there? and does any body have any of them for sale, or know where I can get them?
Thanks
-Graham [img]graemlins/jammin.gif[/img]

Well there's four that I know of.

EEM - Active Electronic Enclosure Module

PBM - Parametric Bass Module

KEQ - KICKEQ Module

SWX - Active Subwoofer Crossover Module

Specs available if you need them. I'm not sure where you would find the actual pieces nowadays.

[ December 12, 2004, 07:11 PM: Message edited by: Hardwrkr ]

THank you so much hardworker, There on Ebay from a kicker rep./ distributer for $8.95 each US. Those sound really cool, where do I find more info, does anybody know?

maybe someone has an old kicker catalogue (97-2000)I'll try and find some of mine.
i have TWX(tweeter x-o),MRX(midrange x-o),SWX(sub x-o),RGX(remote gain low pass x-o)
others are MMD(muti modual docking port),???(center channel,rear fill) and the others listed above.

:cool:

Thanks Rob. The subwoofer control ones are the ones Im interested in. Thanks everybody so far for your help, I cant begin to thank some of you

PBM (parametric bass module)
-variable bass boost 0-+15dB
-variable centre frequency 40-140Hz
-includes dash mount controller and 25ft cable
-subsonic filter 24dB/octave at 20Hz
-external amplifier bypass switch

KEQ (KICKEQ module)
-bass boost 0-+18dB centered at 40Hz
-treble boost 0-+12dB at 18KHz
-EQ and bypass modes independently selectable for host amplifier and external amlifier RCA outputs

SWX (active sub crossover module)
-two way 24dB/octave active electronic crossover provides a crossover point between sub and midbass frequencies
-selectable crossover frequencies with supplied chips:60, 80, 100Hz
-internal amplifier function switch: directs high pass or low pass signal to internal amplifier
-external amplifier function switch: directs low pass, high pass or full range signal to output RCA jacks
-optional subsonic filter functions: allows 24dB/octave cutoff at 25Hz

EEM (active electronic enclosure module)
-enhances performance of infinite baffle mounted Kicker freeair woofers to simulate the response of Kicker CompVR woofers in sealed enclosures
-eliminates the need for speaker enclosure

RGX (active remote gain crossover module)
-control amp gain from front seat 0 to -26dB
-includes dash mount controller and 25ft cord
-24dB/octave active low pass crossover provides a crossover point between sub and mid
-selectable crossover frequencies with supplied chips: 60, 80, 100Hz
-internal amplifier function switch: directs full range or low pass signal to internal amplifier
-external amplifier bypass switch

I better get a nice Christmas card for writing all this out. [img]graemlins/thumb.gif[/img]

[ December 13, 2004, 01:10 AM: Message edited by: Hardwrkr ]

^^^^^ this "Hardworker" is awesome isn't he, what a great guy for typing up all that stuff

Well I suppose that'll do for a Christmas card then.
Hope it was helpfull. [img]graemlins/thumb.gif[/img]

awww, fine I'll get you an X-mas card, I must be a softie. perhaps a digital one got an email?