Brahma MKII Question
Hey guys,
i have a fairly quick easy question. Can i give 2 Brahma MKII 12" subs in a sealed box 2500w RMS? or is that too much not too sure where i can find the subs ratings but would 1250 a piece be safe? thanks |
how large of an enclosure? in a Qtc .707 sealed enclosure, the brahma mk1's and mk2's will reach xmax around 900 watts iirc.
|
I was thinking about going 1.25-1.5 per sub. Would i be better off selling my viper amp and getting something with a bit less power.
like 2000w ? |
or you could turn down the gain to control the output...
have you reviewed the material on the adire audio website about box sizes, response and power handling? |
Nope. I can never find anything on that site :( i'll go looking again.
|
http://www.adireaudio.com/Files/BrahmaPowerHandling.pdf\
So according to this file, The brahma will require 900w RMS to reach full extension in a box just under 1Cuft... Factoring in the 3/4 inch MDF. to get the .92 CUFt i would require a box 13.5 * 13.5 * 12.6 Per sub. Not sure how to factor in the driver displacment into this equation. Would i be better off with that small box at .92 CUFT with 1000-1200w or Could i go with a 1.25 CUFT box and give the woofer 1000w RMS I'm looking for a good combination between a SQ and SPL setup. |
A lot of headroom is always a good thing.
|
can someone reccomend a box size and design for me? For 2 brahma 12"s sealed preferably
|
All times are GMT -5. The time now is 08:29 AM. |
© 2024 MH Sub I, LLC dba Internet Brands